[PATCH] ppc44x:PHY fixup for USB on canyonlands board
Josh Boyer
jwboyer at linux.vnet.ibm.com
Thu Nov 11 01:19:14 EST 2010
On Wed, Nov 10, 2010 at 05:07:15PM +0530, Rupjyoti Sarmah wrote:
>This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands.
>
>Signed-off-by: Rupjyoti Sarmah <rsarmah at apm.com>
>---
> arch/powerpc/boot/dts/canyonlands.dts | 11 ++++
> arch/powerpc/platforms/44x/44x.h | 5 ++
> arch/powerpc/platforms/44x/Kconfig | 7 ++
> arch/powerpc/platforms/44x/Makefile | 1 +
> arch/powerpc/platforms/44x/ppc44x_fixup.c | 90 +++++++++++++++++++++++++++++
> 5 files changed, 114 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/platforms/44x/ppc44x_fixup.c
Is this just for canyonlands? If so, it's probably better off in a
caynonlands specific file, or a function that gets called in the common
platform file if the model matches canyonlands. It seems a bit overkill
to introduce an entire new file and Kconfig option for this.
>
>diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
>index a303703..d6e9ba2 100644
>--- a/arch/powerpc/boot/dts/canyonlands.dts
>+++ b/arch/powerpc/boot/dts/canyonlands.dts
>@@ -171,6 +171,11 @@
> 0x5 0x4>; /* AHBDMA */
> };
>
>+ CPLD: cpld at e1000000 {
>+ compatible = "apm, ppc460ex-bcsr";
>+ reg = <4 0xe1000000 0x9>;
>+ };
Normally we don't leave a space in compatible properties.
>+
> POB0: opb {
> compatible = "ibm,opb-460ex", "ibm,opb";
> #address-cells = <1>;
>@@ -320,6 +325,12 @@
> interrupts = <0x3 0x4>;
> };
>
>+ GPIO0: gpio at ef600b00 {
>+ compatible = "apm,ppc44x-gpio-base";
>+ reg = <0xef600b00 0x00000048>;
>+ gpio-controller;
>+ };
We already have "ibm,ppc4xx-gpio" as an established compatible field for
4xx GPIO. As far as I know, this is not a different kind of GPIO
controller than what is found on the other boards, so we should stick
with the existing property.
>+
> ZMII0: emac-zmii at ef600d00 {
> compatible = "ibm,zmii-460ex", "ibm,zmii";
> reg = <0xef600d00 0x0000000c>;
>diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
>index dbc4d2b..bc2ab7a 100644
>--- a/arch/powerpc/platforms/44x/44x.h
>+++ b/arch/powerpc/platforms/44x/44x.h
>@@ -4,4 +4,9 @@
> extern u8 as1_readb(volatile u8 __iomem *addr);
> extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
>
>+#define BCSR_USB_EN 0x11
>+#define GPIO0_OSRH 0xC
>+#define GPIO0_TSRH 0x14
>+#define GPIO0_ISR1H 0x34
>+
> #endif /* __POWERPC_PLATFORMS_44X_44X_H */
>diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
>index 0f979c5..9ca4aaa 100644
>--- a/arch/powerpc/platforms/44x/Kconfig
>+++ b/arch/powerpc/platforms/44x/Kconfig
>@@ -117,12 +117,19 @@ config CANYONLANDS
> default n
> select PPC44x_SIMPLE
> select 460EX
>+ select 44X_FIXUP
> select PCI
> select PPC4xx_PCI_EXPRESS
> select IBM_NEW_EMAC_RGMII
> select IBM_NEW_EMAC_ZMII
> help
> This option enables support for the AMCC PPC460EX evaluation board.
>+config 44X_FIXUP
>+ bool "4xx_fixup"
>+ depends on 44x
>+ default n
>+ help
>+ This option enables supporting APM PPC4XX based evaluation board fixups.
>
> config GLACIER
> bool "Glacier"
>diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
>index 82ff326..d4bfb97 100644
>--- a/arch/powerpc/platforms/44x/Makefile
>+++ b/arch/powerpc/platforms/44x/Makefile
>@@ -1,6 +1,7 @@
> obj-$(CONFIG_44x) := misc_44x.o idle.o
> obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
> obj-$(CONFIG_EBONY) += ebony.o
>+obj-$(CONFIG_44X_FIXUP) += ppc44x_fixup.o
> obj-$(CONFIG_SAM440EP) += sam440ep.o
> obj-$(CONFIG_WARP) += warp.o
> obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
>diff --git a/arch/powerpc/platforms/44x/ppc44x_fixup.c b/arch/powerpc/platforms/44x/ppc44x_fixup.c
>new file mode 100644
>index 0000000..4e254eb
>--- /dev/null
>+++ b/arch/powerpc/platforms/44x/ppc44x_fixup.c
>@@ -0,0 +1,90 @@
>+/*
>+ * This contain fixup code for Applied Micro ppc44x series of processors.
>+ *
>+ * Copyright (c) 2010, Applied Micro Circuits Corporation
>+ * Author: Rupjyoti Sarmah <rsarmah at apm.com>
>+ *
>+ * This program is free software; you can redistribute it and/or
>+ * modify it under the terms of the GNU General Public License as
>+ * published by the Free Software Foundation; either version 2 of
>+ * the License, or (at your option) any later version.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ *
>+ * You should have received a copy of the GNU General Public License
>+ * along with this program; if not, write to the Free Software
>+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>+ * MA 02111-1307 USA
>+ *
>+ */
>+
>+#include <linux/kernel.h>
>+#include <linux/init.h>
>+#include <linux/io.h>
>+#include <linux/of.h>
>+#include "44x.h"
>+
>+/* PHY fixup code on Canyonlands kit. */
>+
>+static int __init ppc460ex_canyonlands_fixup(void)
>+{
>+ u8 __iomem *bcsr ;
>+ void __iomem *vaddr;
>+ struct device_node *np;
>+ u32 val ;
>+
>+ np = of_find_compatible_node(NULL, NULL, "apm, ppc460ex-bcsr");
>+ if (!np) {
>+ printk(KERN_ERR "failed did not find apm, ppc460ex bcsr node\n");
>+ return -ENODEV;
>+ }
Nit: the indentation on that brace is off.
>+
>+ bcsr = of_iomap(np, 0);
>+ of_node_put(np);
>+
>+ if (!bcsr) {
>+ printk(KERN_CRIT "Could not remap bcsr\n");
>+ return -ENODEV;
>+ }
>+
>+ clrbits8(&bcsr[7], BCSR_USB_EN);
>+ udelay(100000);
>+
>+ setbits8(&bcsr[7], BCSR_USB_EN);
>+ udelay(100000);
>+
>+ clrbits8(&bcsr[7], BCSR_USB_EN);
>+ udelay(100000);
>+
>+ np = of_find_compatible_node(NULL, NULL, "apm,ppc44x-gpio-base");
>+
>+ /* configure multiplexed gpio16 and gpio19 */
>+
>+ vaddr = of_iomap(np, 0);
>+ if (!vaddr) {
>+ printk(KERN_CRIT "Could not get gpio node address\n");
>+ return -ENODEV;
>+ }
If this fails, but the bcsr search works, what happens? Possibly
nothing, but I wonder if the search for both nodes should be done before
actually touching the hardware.
>+
>+ /* configure gpio16 and gpio19 as alternate1 */
>+
>+ /* GPIO0_ISR1H for alternate 1 settings */
>+ val = in_be32(vaddr + GPIO0_ISR1H);
>+ out_be32((vaddr + GPIO0_ISR1H), val | 0x4200000);
>+
>+ /* GPIO0_OSRH for alternate 1 settings */
>+ val = in_be32(vaddr + GPIO0_OSRH);
>+ out_be32((vaddr + GPIO0_OSRH), val | 0x42000000);
>+
>+ /* GPIO0_TSRH for alternate 1 settings */
>+ val = in_be32(vaddr + GPIO0_TSRH);
>+ out_be32((vaddr + GPIO0_TSRH), val | 0x42000000);
>+ of_node_put(np);
>+ return 0;
>+
>+}
>+arch_initcall(ppc460ex_canyonlands_fixup);
With this being an arch_initcall, it will get called for every kind of
platform in a multi-board kernel. Another reason to only call it from a
board specific probe function if it really is canyonlands specific.
josh
More information about the Linuxppc-dev
mailing list