BUG in dma-mapping.h:218 // MESH SCSI driver not working

[Stef Simoens]

Hello,

Some time ago (July 24th 2009 my mailbox says) I emailed you and the 
linuxppc-dev list about my problems booting from the mesh SCSI controller.

I just compiled 2.6.31 (actually, gentoo-sources-2.6.31-r10); but the 
problem remains
I know that 2.6.33 is out, but as I didn't see any changes to the 
mesh-driver I guess that the problem is still there ...

This is the logging I get when I boot (2.6.31):

mesh_abort(ef8501e0)
mesh: state at ef9eaa50, regs at f1010000, dma at f1014a00
    ct=   1 seq=47 bs=4027 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=f0
    dma stat=e0 cmdptr=2f8c2010
    phase=5 msgphase=0 conn_tgt=0 data_ptr=0
    dma_st=0 dma_ct=0 n_msgout=0
    target 0: req=ef85901e0 goes_out=0 saved_ptr=0
mesh_abort(ef850280)
mesh: state at ef9eaa50, regs at f1010000, dma at f1014a00
    ct=   1 seq=47 bs=4027 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=f0
    dma stat=e0 cmdptr=2f8c2010
    phase=5 msgphase=0 conn_tgt=0 data_ptr=0
    dma_st=0 dma_ct=0 n_msgout=0
    target 0: req=ef8501e0 goes_out=0 saved_ptr=0
mesh_host_reset
mesh_abort(ef8501e0)
mesh: state at ef9eaa50, regs at f1010000, dma at f1014a00
    ct=   0 seq=6a bs=4026 fc= 5 exc= 0 err= 0 im= 7 int= 0 sp= 2
 fifo data=c0
 fifo data=01
 fifo data=03
 fifo data=01
 fifo data=19
    dma stat=e0 cmdptr=2f8c2010
    phase=3 msgphase=1 conn_tgt=0 data_ptr=0
    dma_st=0 dma_ct=0 n_msgout=6
    target 0: req=ef8501e0 goes_out=0 saved_ptr=0
mesh_host_reset
...
[afterwards, it "disconnects" all the disks and then it panics as it 
cannot find the root partition]

2.6.29 runs fine ... but I guess that at some point, I would like to 
upgrade to the latest stable kernel.

The machine is a PowerPC9600 with a 740 upgrade card, 1GB memory, kernel 
compiled with GCC 4.3.4 ...

Of course I am willing to offer you all assistance you need to help you 
pin-point the problem...

Thanks for your help

Stef

Stef Simoens schreef:
> Hello Ben,
>
> Thank you for your reply.
>   
>> On Fri, 2009-07-24 at 00:18 +0200, Stef Simoens wrote:
>>     
>>> I tried the latest 2.6.31-rc3-git3 (without any other patch).
>>> However, I have the same behaviour as the patched 2.6.30 (so: no BUG,
>>> but the mesh_abort messages).
>>>       
>> Would it be possible for you to roughly find out at what kernel version
>> it stopped working ? (Some kernels may need my patch to avoid crashing)
>>     
>
> I am currently running 2.6.29-gentoo-r5 (that's somewhere at the end of
> 2.6.29, probably 2.6.29.5).
>
> I compiled 2.6.30 as soon as it came 'stable'.
> In any version of 2.6.30,  I encounter the BUG (dma-mapping.h:218).
>
> I didn't react immediately, I actually guessed that the problem would have
> been reported and solved in another 2.6.30.x.
> Because it didn't, I started browsing the mailing-list (and found your
> patch).
> 2.6.30-gentoo-r3 with your patch applied doesn't give the bug,
> but gives the mesh_abort.
>
> Before asking the question, I wanted to build the latest 2.6.31-rc
> available to make sure my problem didn't get solved in the meantime.
> 2.6.31-rc3 gives the same mesh_abort.
>
> Would you like me to try all the linux-2.6.30-rc?
> Could you give me your best guess starting-point?
>
> I know that there exists something as git-disect ... but I have never used
> git (there always needs to be the first time, of course).
>
> Kind regards,
>
> Stef
>   
-- 
Stef Simoens                                 stef.simoens at numericable.be
+32 486 577 963                         http://users.numericable.be/stef

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20100319/75ae7bef/attachment-0001.htm>