Problem with PCI bus rescan on 460EX

[Felix Radensky]

Hi Alex,

Resending, previous attempt was erroneously send as HTML.

Thanks a lot for replying.

Alex Chiang wrote:
> * Felix Radensky <felix at embedded-sol.com>:
>   
>> The problem arises when device is plugged in after boot. After doing
>> echo 1 > /sys/bus/pci/rescan
>> the device is identified, but bridge memory window is not allocated,
>> and reads from device memory regions return 0xffffffff. Below is
>> relevant output:
>>     
>
> Do you need firmware support on your platform for hotplug?
>   
I don't think so, but I've added powerpc guys to CC to make sure.
> Can you please send full dmesg during successful boot, full dmesg
> log during unsuccessful rescan, and contents of /proc/iomem and
> /proc/ioports during success and failure cases?
>
> Be sure you have PCI_CONFIG_DEBUG turned on.
>   
Attached. I really appreciate your help. Thanks a lot.

Felix.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: failure.txt
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20100311/5fae1b29/attachment-0002.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: success.txt
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20100311/5fae1b29/attachment-0003.txt>