[PATCH] powerpc: Renaming following split of GE Fanuc joint venture
Martyn Welch
martyn.welch at ge.com
Tue Mar 2 01:41:59 EST 2010
This patch renames GE Fanuc boards following the split-up of the GE Fanuc joint venture. These boards are now made by GE Intelligent platorms.
Signed-off-by: Martyn Welch <martyn.welch at gefanuc.com>
---
arch/powerpc/boot/dts/gef_ppc9a.dts | 4 ++--
arch/powerpc/boot/dts/gef_sbc310.dts | 4 ++--
arch/powerpc/boot/dts/gef_sbc610.dts | 4 ++--
arch/powerpc/platforms/86xx/Kconfig | 12 ++++++------
arch/powerpc/platforms/86xx/gef_gpio.c | 10 +++++-----
arch/powerpc/platforms/86xx/gef_pic.c | 6 +++---
arch/powerpc/platforms/86xx/gef_ppc9a.c | 12 ++++++------
arch/powerpc/platforms/86xx/gef_sbc310.c | 12 ++++++------
arch/powerpc/platforms/86xx/gef_sbc610.c | 12 ++++++------
9 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 977f260..83f4b79 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -1,7 +1,7 @@
/*
- * GE Fanuc PPC9A Device Tree Source
+ * GE PPC9A Device Tree Source
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 8e4efff..fc3a331 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -1,7 +1,7 @@
/*
- * GE Fanuc SBC310 Device Tree Source
+ * GE SBC310 Device Tree Source
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index bb70600..c0671cc 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -1,7 +1,7 @@
/*
- * GE Fanuc SBC610 Device Tree Source
+ * GE SBC610 Device Tree Source
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 2bbfd53..fbe9f36 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -33,32 +33,32 @@ config MPC8610_HPCD
This option enables support for the MPC8610 HPCD board.
config GEF_PPC9A
- bool "GE Fanuc PPC9A"
+ bool "GE PPC9A"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
- This option enables support for GE Fanuc's PPC9A.
+ This option enables support for the GE PPC9A.
config GEF_SBC310
- bool "GE Fanuc SBC310"
+ bool "GE SBC310"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
- This option enables support for GE Fanuc's SBC310.
+ This option enables support for the GE SBC310.
config GEF_SBC610
- bool "GE Fanuc SBC610"
+ bool "GE SBC610"
select DEFAULT_UIMAGE
select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAS_RAPIDIO
help
- This option enables support for GE Fanuc's SBC610.
+ This option enables support for the GE SBC610.
endif
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b2ea887..11f7b2b 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -1,9 +1,9 @@
/*
- * Driver for GE Fanuc's FPGA based GPIO pins
+ * Driver for GE FPGA based GPIO
*
- * Author: Martyn Welch <martyn.welch at gefanuc.com>
+ * Author: Martyn Welch <martyn.welch at ge.com>
*
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -164,6 +164,6 @@ static int __init gef_gpio_init(void)
};
arch_initcall(gef_gpio_init);
-MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver");
-MODULE_AUTHOR("Martyn Welch <martyn.welch at gefanuc.com");
+MODULE_DESCRIPTION("GE I/O FPGA GPIO driver");
+MODULE_AUTHOR("Martyn Welch <martyn.welch at ge.com");
MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c
index 0110a87..c92d5fb 100644
--- a/arch/powerpc/platforms/86xx/gef_pic.c
+++ b/arch/powerpc/platforms/86xx/gef_pic.c
@@ -1,9 +1,9 @@
/*
- * Interrupt handling for GE Fanuc's FPGA based PIC
+ * Interrupt handling for GE FPGA based PIC
*
- * Author: Martyn Welch <martyn.welch at gefanuc.com>
+ * Author: Martyn Welch <martyn.welch at ge.com>
*
- * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index a792e5d..60ce07e 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -1,9 +1,9 @@
/*
- * GE Fanuc PPC9A board support
+ * GE PPC9A board support
*
- * Author: Martyn Welch <martyn.welch at gefanuc.com>
+ * Author: Martyn Welch <martyn.welch at ge.com>
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void)
}
#endif
- printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n");
+ printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
@@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
- seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
('A' + gef_ppc9a_get_board_rev()));
@@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
define_machine(gef_ppc9a) {
- .name = "GE Fanuc PPC9A",
+ .name = "GE PPC9A",
.probe = gef_ppc9a_probe,
.setup_arch = gef_ppc9a_setup_arch,
.init_IRQ = gef_ppc9a_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 6a1a613..3ecee25 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -1,9 +1,9 @@
/*
- * GE Fanuc SBC310 board support
+ * GE SBC310 board support
*
- * Author: Martyn Welch <martyn.welch at gefanuc.com>
+ * Author: Martyn Welch <martyn.welch at ge.com>
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void)
}
#endif
- printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n");
+ printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
@@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
- seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id());
seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(),
@@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_sbc310, declare_of_platform_devices);
define_machine(gef_sbc310) {
- .name = "GE Fanuc SBC310",
+ .name = "GE SBC310",
.probe = gef_sbc310_probe,
.setup_arch = gef_sbc310_setup_arch,
.init_IRQ = gef_sbc310_init_irq,
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index e10688a..5090d60 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -1,9 +1,9 @@
/*
- * GE Fanuc SBC610 board support
+ * GE SBC610 board support
*
- * Author: Martyn Welch <martyn.welch at gefanuc.com>
+ * Author: Martyn Welch <martyn.welch at ge.com>
*
- * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void)
}
#endif
- printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+ printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
#ifdef CONFIG_SMP
mpc86xx_smp_init();
@@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m)
{
uint svid = mfspr(SPRN_SVR);
- seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
('A' + gef_sbc610_get_board_rev() - 1));
@@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void)
machine_device_initcall(gef_sbc610, declare_of_platform_devices);
define_machine(gef_sbc610) {
- .name = "GE Fanuc SBC610",
+ .name = "GE SBC610",
.probe = gef_sbc610_probe,
.setup_arch = gef_sbc610_setup_arch,
.init_IRQ = gef_sbc610_init_irq,
--
Martyn Welch (Principal Software Engineer) | Registered in England and
GE Intelligent Platforms | Wales (3828642) at 100
T +44(0)127322748 | Barbirolli Square, Manchester,
E martyn.welch at ge.com | M2 3AB VAT:GB 927559189
More information about the Linuxppc-dev
mailing list