New P2020-based board (mpc85xx) gets "Processor 1 is stuck" on 2.6.34, not on 2.6.32

Kyle Moffett kyle at moffetthome.net
Fri Jun 25 14:02:48 EST 2010


Oops, put the old linuxppc list on the CC, sorry!

On Thu, Jun 24, 2010 at 23:32, Kyle Moffett <kyle at moffetthome.net> wrote:
> Hello,
>
> I'm working on a new board port for a P2020-based board, and I'm
> having problems with my second core not starting up on 2.6.34, even
> though it starts up fine on 2.6.32.
>
> In adding various debugs to mpc85xx_kick_cpu(), it looks like the
> virtual address is detected as 0x7ffff280 on both, and it seems to
> ioremap it to the same address.  Furthermore, both of them get the
> "ack" from the other CPU almost immediately (within 1ms).
> Unfortunately, after that the second core fails to rendezvous
> elsewhere in the SMP code and as a result I get "Processor 1 is
> stuck".
>
> Unfortunately I've had no luck looking through "git log
> v2.6.32..v2.6.34 -- arch/powerpc/" by hand, and there are enough
> mechanical merge conflicts with my patchset to make "bisection" very
> painful (IE: git bisect, git cherry-pick, test, git reset --hard
> HEAD^, repeat)
>
> Any additional suggestions on where to look would be much appreciated.
>
> Cheers,
> Kyle Moffett
>


More information about the Linuxppc-dev mailing list