[PATCH 0/2] mpc5200 ac97 gpio reset

[Eric Millbrandt]

> -----Original Message-----
> From: Mark Brown [mailto:broonie at opensource.wolfsonmicro.com]
> Sent: Wednesday, June 09, 2010 06:31
> To: Wolfgang Denk
> Cc: Jon Smirl; Eric Millbrandt; linuxppc-dev at lists.ozlabs.org
> Subject: Re: [PATCH 0/2] mpc5200 ac97 gpio reset
--snip--
> It might, however, be sensible to make the GPIO based reset be optional
> based on having the OF data for the GPIOs.  That way existing DTs will
> work without changes and systems that can use the reset implementation
> in the controller will be able to do so.

This is a reasonable request.  I will respin the patch to do this.

Eric Millbrandt

This e-mail and the information, including any attachments, it contains are intended to be a confidential communication only to the person or entity to whom it is addressed and may contain information that is privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the sender and destroy the original message.

Thank you.

Please consider the environment before printing this email.