[PATCH]460EX on-chip SATA driver<kernel 2.6.33><resubmission>

[Wolfgang Denk]

Dear Rupjyoti Sarmah,

In message <201006041226.o54CQH2V017366 at amcc.com> you wrote:
> This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX.
> 
> Signed-off-by: Rupjyoti Sarmah <rsarmah at appliedmicro.com> 
> Signed-off-by: Mark Miesfeld <mmiesfeld at appliedmicro.com>
> Signed-off-by: Prodyut Hazarika <phazarika at appliedmicro.com>
> 
> ---
>  drivers/ata/Kconfig          |    9 +
>  drivers/ata/Makefile         |    1 +
>  drivers/ata/sata_dwc_460ex.c | 1808 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 1818 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/ata/sata_dwc_460ex.c

This driver needs fixing. It will not compile against recent kernel
versions.

...
> diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
> new file mode 100644
> index 0000000..e6e2896
> --- /dev/null
> +++ b/drivers/ata/sata_dwc_460ex.c
> @@ -0,0 +1,1808 @@
...
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/of_platform.h>
> +#include <linux/libata.h>
> +#include "libata.h"
> +
> +#include <scsi/scsi_host.h>
> +#include <scsi/scsi_cmnd.h>

You miss a "#include <linux/slab.h>" here.

...
> +	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
> +		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
> +
> +	ap->prd = 0;	/* set these so libata doesn't use them */
> +	ap->prd_dma = 0;

s/prd/bmdma_prd/ in these two lines (cf. commit f60d7011).


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
He had quite a powerful intellect, but it  was  as  powerful  like  a
locomotive,  and  ran on rails and was therefore almost impossible to
steer.                          - Terry Pratchett, _Lords and Ladies_