[PATCH 5/6] powerpc/of: add eSPI controller dts bindings

[Grant Likely]

On Tue, Jul 20, 2010 at 10:08:24AM +0800, Mingkai Hu wrote:
> Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>
> ---
>  Documentation/powerpc/dts-bindings/fsl/spi.txt |   20 ++++++++++++++++++++
>  1 files changed, 20 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt
> index 80510c0..b360bf9 100644
> --- a/Documentation/powerpc/dts-bindings/fsl/spi.txt
> +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt
> @@ -29,3 +29,23 @@ Example:
>  		gpios = <&gpio 18 1	// device reg=<0>
>  			 &gpio 19 1>;	// device reg=<1>
>  	};
> +
> +
> +* eSPI (Enhanced Serial Peripheral Interface)
> +
> +Required properties:
> +- compatible : should be "fsl,espi".

Good practice is to always fully identify the SoC in the compatible values, followed by an optional list of other specific chips it is compatible with.  Generic compatibles like "fsl,espi" are not a good idea.

+- compatible: should be "fsl,<chip>-espi".

> +- reg : Offset and length of the register set for the device.
> +- interrupts : should contain eSPI interrupt, the device has one interrupt.
> +- fsl,espi-num-chipselects : the number of the chipselect signals.
> +
> +Example:
> +	spi at 110000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,espi";
> +		reg = <0x110000 0x1000>;
> +		interrupts = <53 0x2>;
> +		interrupt-parent = <&mpic>;
> +		fsl,espi-num-chipselects = <4>;
> +	};
> -- 
> 1.6.4
> 
>