[PATCH 2/3] USB: add of_platform glue driver for FSL USB DR controller
Anatolij Gustschin
agust at denx.de
Fri Jul 23 02:25:21 EST 2010
The driver creates platform devices based on the information
from USB nodes in the flat device tree. This is the replacement
for old arch fsl_soc usb code removed by the previous patch.
It uses usual of-style binding, available EHCI-HCD and UDC
drivers can be bound to the created devices. The new of-style
driver additionaly instantiates USB OTG platform device, as the
appropriate USB OTG driver will be added soon.
Signed-off-by: Anatolij Gustschin <agust at denx.de>
Cc: Kumar Gala <galak at kernel.crashing.org>
Cc: Grant Likely <grant.likely at secretlab.ca>
---
drivers/usb/gadget/Kconfig | 1 +
drivers/usb/host/Kconfig | 5 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/fsl-mph-dr-of.c | 189 ++++++++++++++++++++++++++++++++++++++
4 files changed, 196 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/fsl-mph-dr-of.c
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index cd27f9b..e15e314 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -158,6 +158,7 @@ config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
depends on FSL_SOC || ARCH_MXC
select USB_GADGET_DUALSPEED
+ select USB_FSL_MPH_DR_OF
help
Some of Freescale PowerPC processors have a High Speed
Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2d926ce..6687523 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -112,10 +112,15 @@ config XPS_USB_HCD_XILINX
support both high speed and full speed devices, or high speed
devices only.
+config USB_FSL_MPH_DR_OF
+ bool
+ depends on PPC_OF
+
config USB_EHCI_FSL
bool "Support for Freescale on-chip EHCI USB controller"
depends on USB_EHCI_HCD && FSL_SOC
select USB_EHCI_ROOT_HUB_TT
+ select USB_FSL_MPH_DR_OF
---help---
Variation of ARC USB block used in some Freescale chips.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b6315aa..aacbe82 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -33,4 +33,5 @@ obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
+obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
new file mode 100644
index 0000000..020a939
--- /dev/null
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -0,0 +1,189 @@
+/*
+ * Setup platform devices needed by the Freescale multi-port host
+ * and/or dual-role USB controller modules based on the description
+ * in flat device tree.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+struct fsl_usb2_dev_data {
+ char *dr_mode; /* controller mode */
+ char *drivers[3]; /* drivers to instantiate for this mode */
+ enum fsl_usb2_operating_modes op_mode; /* operating mode */
+};
+
+struct fsl_usb2_dev_data dr_mode_data[] __devinitdata = {
+ {
+ "host",
+ { "fsl-ehci", NULL, NULL, },
+ FSL_USB2_DR_HOST,
+ },
+ {
+ "otg",
+ { "fsl-ehci", "fsl-usb2-udc", "fsl-usb2-otg", },
+ FSL_USB2_DR_OTG,
+ },
+ {
+ "periferal",
+ { "fsl-usb2-udc", NULL, NULL, },
+ FSL_USB2_DR_DEVICE,
+ },
+};
+
+struct fsl_usb2_dev_data * __devinit get_dr_mode_data(struct device_node *np)
+{
+ const unsigned char *prop;
+ int i;
+
+ prop = of_get_property(np, "dr_mode", NULL);
+ if (prop) {
+ for (i = 0; i < ARRAY_SIZE(dr_mode_data); i++) {
+ if (!strcmp(prop, dr_mode_data[i].dr_mode))
+ return &dr_mode_data[i];
+ }
+ }
+ return &dr_mode_data[0]; /* mode not specified, use host */
+}
+
+static enum fsl_usb2_phy_modes __devinit determine_usb_phy(const char *phy_type)
+{
+ if (!phy_type)
+ return FSL_USB2_PHY_NONE;
+ if (!strcasecmp(phy_type, "ulpi"))
+ return FSL_USB2_PHY_ULPI;
+ if (!strcasecmp(phy_type, "utmi"))
+ return FSL_USB2_PHY_UTMI;
+ if (!strcasecmp(phy_type, "utmi_wide"))
+ return FSL_USB2_PHY_UTMI_WIDE;
+ if (!strcasecmp(phy_type, "serial"))
+ return FSL_USB2_PHY_SERIAL;
+
+ return FSL_USB2_PHY_NONE;
+}
+
+struct platform_device * __devinit
+fsl_usb2_device_register(struct of_device *ofdev,
+ struct fsl_usb2_platform_data *pdata,
+ const char *name, int id)
+{
+ struct platform_device *pdev;
+ const struct resource *res = ofdev->resource;
+ unsigned int num = ofdev->num_resources;
+ int retval;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ pdev->dev.parent = &ofdev->dev;
+
+ pdev->dev.coherent_dma_mask = ofdev->dev.coherent_dma_mask;
+ pdev->dev.dma_mask = &pdev->archdata.dma_mask;
+ *pdev->dev.dma_mask = *ofdev->dev.dma_mask;
+
+ retval = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (retval)
+ goto error;
+
+ if (num) {
+ retval = platform_device_add_resources(pdev, res, num);
+ if (retval)
+ goto error;
+ }
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto error;
+
+ return pdev;
+
+error:
+ platform_device_put(pdev);
+ return ERR_PTR(retval);
+}
+
+static int __devinit fsl_usb2_mph_dr_of_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->dev.of_node;
+ struct platform_device *usb_dev;
+ struct fsl_usb2_platform_data data, *pdata;
+ struct fsl_usb2_dev_data *dev_data;
+ const unsigned char *prop;
+ static unsigned int idx;
+ int i;
+
+ if (!of_device_is_available(np))
+ return -ENODEV;
+
+ pdata = match->data;
+ if (!pdata) {
+ memset(&data, 0, sizeof(data));
+ pdata = &data;
+ }
+
+ dev_data = get_dr_mode_data(np);
+
+ if (of_device_is_compatible(np, "fsl-usb2-mph")) {
+ prop = of_get_property(np, "port0", NULL);
+ if (prop)
+ pdata->port_enables |= FSL_USB2_PORT0_ENABLED;
+
+ prop = of_get_property(np, "port1", NULL);
+ if (prop)
+ pdata->port_enables |= FSL_USB2_PORT1_ENABLED;
+
+ pdata->operating_mode = FSL_USB2_MPH_HOST;
+ } else {
+ /* setup mode selected in the device tree */
+ pdata->operating_mode = dev_data->op_mode;
+ }
+
+ prop = of_get_property(np, "phy_type", NULL);
+ pdata->phy_mode = determine_usb_phy(prop);
+
+ for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
+ if (!dev_data->drivers[i])
+ continue;
+ usb_dev = fsl_usb2_device_register(ofdev, pdata,
+ dev_data->drivers[i], idx);
+ if (IS_ERR(usb_dev)) {
+ dev_err(&ofdev->dev, "Can't register usb device\n");
+ return PTR_ERR(usb_dev);
+ }
+ }
+ idx++;
+ return 0;
+}
+
+static const struct of_device_id fsl_usb2_mph_dr_of_match[] = {
+ { .compatible = "fsl-usb2-mph", },
+ { .compatible = "fsl-usb2-dr", },
+ {},
+};
+
+static struct of_platform_driver fsl_usb2_mph_dr_driver = {
+ .driver = {
+ .name = "fsl-usb2-mph-dr",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_usb2_mph_dr_of_match,
+ },
+ .probe = fsl_usb2_mph_dr_of_probe,
+};
+
+static int __init fsl_usb2_mph_dr_init(void)
+{
+ return of_register_platform_driver(&fsl_usb2_mph_dr_driver);
+}
+fs_initcall(fsl_usb2_mph_dr_init);
--
1.7.0.4
More information about the Linuxppc-dev
mailing list