[PATCH] Add cmd64x IDE driver to default pmac32 config

[Benjamin Herrenschmidt]

On Sat, 2010-07-03 at 20:21 +0200, lawrence rust wrote:
> The Blue/White Apple PowerMac G3 and early G4's use a cmd64x compatible
> IDE disk controller.  E.g. lspci shows...
> 
> 01:01.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 07)
> 
> Unfortunately the default pmac32 configuration does not include this
> driver and so PowerMac G3's can't load a root filesystem.  This is an
> issue on a least Ubuntu since version 9.04, which uses the default
> config as a starting point.
> 
> Signed-off-by: Lawrence Rust <lawrence at softsystem.co.uk>

Shouldn't we just switch the whole thing to libata now anyways ?

Cheers,
Ben.

> diff -uprN a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig 
> --- a/arch/powerpc/configs/pmac32_defconfig	2010-05-16 23:17:36.000000000 +0200
> +++ b/arch/powerpc/configs/pmac32_defconfig	2010-07-03 20:11:10.000000000 +0200
> @@ -738,7 +738,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
>  # CONFIG_BLK_DEV_AEC62XX is not set
>  # CONFIG_BLK_DEV_ALI15X3 is not set
>  # CONFIG_BLK_DEV_AMD74XX is not set
> -# CONFIG_BLK_DEV_CMD64X is not set
> +CONFIG_BLK_DEV_CMD64X=y
>  # CONFIG_BLK_DEV_TRIFLEX is not set
>  # CONFIG_BLK_DEV_CS5520 is not set
>  # CONFIG_BLK_DEV_CS5530 is not set
> 
> 
> 
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev