[PATCH 1/5] powerpc/head fsl: fix the case where we are not in the first page

Sebastian Andrzej Siewior linuxppc-dev at ml.breakpoint.cc
Sat Jan 16 03:41:33 EST 2010


From: Sebastian Andrzej Siewior <bigeasy at linutronix.de>

During boot we change the mapping a few times until we have a "defined"
mapping. During this procedure a small 4KiB mapping is created and after
that one a 64MiB. Currently the offset of the 4KiB page in that we run
is zero because the complete startup up code is in first page which
starts at RPN zero.
If the code is recycled and moved to another location then its execution
will fail because the start address in the 64 MiB mapping is computed
wrongly. It does not consider the offset to the page from the begin of
the memory.
This patch fixes this. Usually (system boot) r25 is zero so this does
not change anything unless the code is recycled.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
---
 arch/powerpc/kernel/head_fsl_booke.S |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 7f4bd7f..799ddbe 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -275,6 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
 	addi	r6,r6,(2f - 1b)
+	add	r6, r6, r25
 	mtspr	SPRN_SRR0,r6
 	mtspr	SPRN_SRR1,r7
 	rfi				/* start execution out of TLB1[0] entry */
-- 
1.6.2.5



More information about the Linuxppc-dev mailing list