i2c_powermac: Kernel access of bad area

Christian Kujau lists at nerdbynature.de
Thu Jan 7 14:41:05 EST 2010


Hi Jean,

On Wed, 6 Jan 2010 at 17:37, Jean Delvare wrote:
> I think that sysfs files creation should be moved to the end of
> probe_thermostat() and sysfs files removal should be moved to the
> beginning of remove_thermostat(). Something like the totally untested
> patch below (no ppc machine at hand):

I applied your patch to 2.6.33-rc3, and was able to unload i2c-powermac and 
then reading the files left in /sys/devices/temperatures. I even tried to 
read the non-existant files (e.g. sensor1_fan_speed, etc...), but the 
kernel just wouldn't oops :)

So the initial oops is gone - yeah!

However, the "Badness" remains when I try to modprobe i2c-powermac again:

[  442.148222] PowerMac i2c bus pmu 2 registered
[  442.148792] PowerMac i2c bus pmu 1 registered
[  442.149299] PowerMac i2c bus mac-io 0 registered
[  442.163573] adt746x: ADT7467 initializing
[  442.170072] adt746x: Lowering max temperatures from 73, 80, 109 to 67, 47, 67
[  442.176559] PowerMac i2c bus uni-n 1 registered
[  442.227115] sysfs: cannot create duplicate filename '/devices/ams'
[  442.227697] ------------[ cut here ]------------
[  442.228176] Badness at fs/sysfs/dir.c:487
[  442.228642] NIP: c00eb71c LR: c00eb71c CTR: 00000000
[  442.229117] REGS: eea0fa50 TRAP: 0700   Not tainted  (2.6.33-rc3)
[  442.229592] MSR: 00029032 <EE,ME,CE,IR,DR>  CR: 42008444  XER: 00000000
[  442.230151] TASK = eea10000[2821] 'modprobe' THREAD: eea0e000
[  442.230191] GPR00: c00eb71c eea0fb00 eea10000 0000004c 000064c6 ffffffff ffffffff 00000000 
[  442.230758] GPR08: efa71740 c03e0000 00000000 000064c6 44008428 10020390 100e0000 100df49c 
[  442.231326] GPR16: 100b54c0 100df49c 100ddd20 1018fb08 100b5340 c03e674c c03e6720 c03ea044 
[  442.231902] GPR24: 00000000 24008422 ffffffea eea0fb58 ef0e9000 ef0e9000 ef0a9ea0 ffffffef 
[  442.233187] NIP [c00eb71c] sysfs_add_one+0x94/0xc0
[  442.233695] LR [c00eb71c] sysfs_add_one+0x94/0xc0
[  442.234363] Call Trace:

I've put the whole dmesg on:

   http://nerdbynature.de/bits/2.6.33-rc2/i2c_powermac/r1/

Thanks for your time,
Christian.
-- 
BOFH excuse #168:

le0: no carrier: transceiver cable problem?


More information about the Linuxppc-dev mailing list