PCI on 834x

[Gary Thomas]

On 02/25/2010 02:24 PM, Scott Wood wrote:
> Gary Thomas wrote:
>> On 02/25/2010 02:03 PM, Scott Wood wrote:
>>> Gary, can you check that the MMIO addresses are going to the PCI bus as-is, and aren't being translated down to zero? I.e. POTARn should equal POBARn, and likewise in the device
>>> tree's pci node's ranges.
>>
>> Hmm, that doesn't match with how I've always had this setup. I have:
>> POTAR0 = 0x00000000
>> POTBR0 = 0x000C0000 (0xC0000000 >> 12)
>>
>> My device tree mappings are:
>> ranges = <0x02000000 0x0 0xC0000000 0xC0000000 0x0 0x10000000
>> 0x01000000 0x0 0x00000000 0xB8000000 0x0 0x00100000>
>
> That ranges property says that host address 0xc0000000 maps to PCI address 0xc0000000, so Linux will program the BAR to 0xc0000000, but the actual accesses will go elsewhere
> because POTAR0 is zero.
>
> Setting POTAR to zero is also a bad idea because it's aliasing your DMA window (it may work in certain situations based on who's initiating the transaction, but it seems like it's
> asking for trouble), plus it seems some cards just don't like address zero.
>
> Try setting POTAR0 to 0x000c0000 and see what happens.

Sadly, that doesn't work at all - neither RedBoot nor Linux
can talk to any of the PCI devices.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------