[PATCH] powerpc/mpc512x: Add gpio driver

[Grant Likely]

On Mon, Feb 22, 2010 at 9:05 AM, Matthias Fuchs
<matthias.fuchs at esd-electronics.com> wrote:
> Hi Grant,
>
> thanks for comments. I will post an updated version soon.
>
>
> On Tuesday 16 February 2010 20:19, Grant Likely wrote:
>> > +       return 0;
>> > +}
>> > +arch_initcall(mpc512x_add_gpiochips);
>>
>> Don't do this.  Either make this a proper of_platform device driver,
>> or call mpc512x_add_gpiochips() explicitly from the arch platform
>> setup code.  Otherwise, if the kernel is built for multiplatform, this
>> function will get executed regardless of the platform.
> In this case I prefer moving the call to the platform code.
> I tested the driver on one of our 5123 boards. Shall I add it
> to mpc5121_ads.c:mpc5121_ads_setup_arch() also? So it's at least called
> on the reference board? I not sure if there are some LEDs or buttons
> that could use it.

Yes, make sure all 5121 platforms call it.

Thanks,
g.