[PATCH 03/04] powerpc/booke: Add definitions for advanced debug registers
Dave Kleikamp
shaggy at linux.vnet.ibm.com
Tue Feb 9 08:53:26 EST 2010
powerpc/booke: Add definitions for advanced debug registers
From: Dave Kleikamp <shaggy at linux.vnet.ibm.com>
Based on patches originally written by Torez Smith.
This patch adds additional definitions for BookE Debug Registers
to the reg_booke.h header file.
Signed-off-by: Dave Kleikamp <shaggy at linux.vnet.ibm.com>
Acked-by: David Gibson <dwg at au1.ibm.com>
Cc: Torez Smith <lnxtorez at linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Josh Boyer <jwboyer at linux.vnet.ibm.com>
Cc: Kumar Gala <galak at kernel.crashing.org>
Cc: Sergio Durigan Junior <sergiodj at br.ibm.com>
Cc: Thiago Jung Bauermann <bauerman at br.ibm.com>
Cc: linuxppc-dev list <Linuxppc-dev at ozlabs.org>
---
arch/powerpc/include/asm/processor.h | 36 ++++++++++++-
arch/powerpc/include/asm/reg_booke.h | 96 ++++++++++++++++++++++++++++++++++
2 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 9eed29e..221ba62 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -161,9 +161,41 @@ struct thread_struct {
#ifdef CONFIG_PPC32
void *pgdir; /* root of page-table tree */
#endif
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
- unsigned long dbcr0; /* debug control register values */
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+ /*
+ * The following help to manage the use of Debug Control Registers
+ * om the BookE platforms.
+ */
+ unsigned long dbcr0;
unsigned long dbcr1;
+#ifdef CONFIG_BOOKE
+ unsigned long dbcr2;
+#endif
+ /*
+ * The stored value of the DBSR register will be the value at the
+ * last debug interrupt. This register can only be read from the
+ * user (will never be written to) and has value while helping to
+ * describe the reason for the last debug trap. Torez
+ */
+ unsigned long dbsr;
+ /*
+ * The following will contain addresses used by debug applications
+ * to help trace and trap on particular address locations.
+ * The bits in the Debug Control Registers above help define which
+ * of the following registers will contain valid data and/or addresses.
+ */
+ unsigned long iac1;
+ unsigned long iac2;
+#if CONFIG_PPC_ADV_DEBUG_IACS > 2
+ unsigned long iac3;
+ unsigned long iac4;
+#endif
+ unsigned long dac1;
+ unsigned long dac2;
+#if CONFIG_PPC_ADV_DEBUG_DVCS > 0
+ unsigned long dvc1;
+ unsigned long dvc2;
+#endif
#endif
/* FP and VSX 0-31 register set */
double fpr[32][TS_FPRWIDTH];
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 3bf7835..8808d30 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -248,6 +248,8 @@
#define DBSR_RET 0x00008000 /* Return Debug Event */
#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */
+#define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */
+#define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */
#endif
#ifdef CONFIG_40x
#define DBSR_IC 0x80000000 /* Instruction Completion */
@@ -313,6 +315,38 @@
#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+
+#define dbcr_iac_range(task) ((task)->thread.dbcr0)
+#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */
+#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */
+#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */
+#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */
+#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */
+#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */
+#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */
+#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */
+
+#define dbcr_dac(task) ((task)->thread.dbcr1)
+#define DBCR_DAC1R DBCR1_DAC1R
+#define DBCR_DAC1W DBCR1_DAC1W
+#define DBCR_DAC2R DBCR1_DAC2R
+#define DBCR_DAC2W DBCR1_DAC2W
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+ DBCR0_IAC3 | DBCR0_IAC4)
+#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \
+ DBCR1_DAC1W | DBCR1_DAC2W)
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+ ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+
#elif defined(CONFIG_BOOKE)
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
@@ -342,19 +376,79 @@
#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
+#define dbcr_dac(task) ((task)->thread.dbcr0)
+#define DBCR_DAC1R DBCR0_DAC1R
+#define DBCR_DAC1W DBCR0_DAC1W
+#define DBCR_DAC2R DBCR0_DAC2R
+#define DBCR_DAC2W DBCR0_DAC2W
+
/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC1US 0xC0000000 /* Instr Addr Cmp 1 Sup/User */
+#define DBCR1_IAC1ER 0x30000000 /* Instr Addr Cmp 1 Eff/Real */
+#define DBCR1_IAC1ER_01 0x10000000 /* reserved */
+#define DBCR1_IAC1ER_10 0x20000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC1ER_11 0x30000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC2US 0x0C000000 /* Instr Addr Cmp 2 Sup/User */
+#define DBCR1_IAC2ER 0x03000000 /* Instr Addr Cmp 2 Eff/Real */
+#define DBCR1_IAC2ER_01 0x01000000 /* reserved */
+#define DBCR1_IAC2ER_10 0x02000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC2ER_11 0x03000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */
#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */
#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */
#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC3US 0x0000C000 /* Instr Addr Cmp 3 Sup/User */
+#define DBCR1_IAC3ER 0x00003000 /* Instr Addr Cmp 3 Eff/Real */
+#define DBCR1_IAC3ER_01 0x00001000 /* reserved */
+#define DBCR1_IAC3ER_10 0x00002000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC3ER_11 0x00003000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */
+#define DBCR1_IAC4US 0x00000C00 /* Instr Addr Cmp 4 Sup/User */
+#define DBCR1_IAC4ER 0x00000300 /* Instr Addr Cmp 4 Eff/Real */
+#define DBCR1_IAC4ER_01 0x00000100 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_10 0x00000200 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */
+#define DBCR1_IAC4ER_11 0x00000300 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */
#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */
#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */
#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */
+#define dbcr_iac_range(task) ((task)->thread.dbcr1)
+#define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */
+#define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */
+#define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */
+#define DBCR_IAC34I DBCR1_IAC34M /* Range Inclusive */
+#define DBCR_IAC34X DBCR1_IAC34MX /* Range Exclusive */
+#define DBCR_IAC34MODE DBCR1_IAC34MX /* IAC 3-4 Mode Bits */
+
/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC1US 0xC0000000 /* Data Addr Cmp 1 Sup/User */
+#define DBCR2_DAC1ER 0x30000000 /* Data Addr Cmp 1 Eff/Real */
+#define DBCR2_DAC2US 0x00000000 /* Data Addr Cmp 2 Sup/User */
+#define DBCR2_DAC2ER 0x00000000 /* Data Addr Cmp 2 Eff/Real */
#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */
+#define DBCR2_DAC12MM 0x00400000 /* DAC 1-2 Mask mode*/
#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12MODE 0x00C00000 /* DAC 1-2 Mode Bits */
#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */
-#endif
+#define DBCR2_DVC1M 0x000C0000 /* Data Value Comp 1 Mode */
+#define DBCR2_DVC1M_SHIFT 18 /* # of bits to shift DBCR2_DVC1M */
+#define DBCR2_DVC2M 0x00030000 /* Data Value Comp 2 Mode */
+#define DBCR2_DVC2M_SHIFT 16 /* # of bits to shift DBCR2_DVC2M */
+#define DBCR2_DVC1BE 0x00000F00 /* Data Value Comp 1 Byte */
+#define DBCR2_DVC1BE_SHIFT 8 /* # of bits to shift DBCR2_DVC1BE */
+#define DBCR2_DVC2BE 0x0000000F /* Data Value Comp 2 Byte */
+#define DBCR2_DVC2BE_SHIFT 0 /* # of bits to shift DBCR2_DVC2BE */
+
+/*
+ * Are there any active Debug Events represented in the
+ * Debug Control Registers?
+ */
+#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \
+ DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \
+ DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)
+#define DBCR1_ACTIVE_EVENTS 0
+
+#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \
+ ((dbcr1) & DBCR1_ACTIVE_EVENTS))
+#endif /* #elif defined(CONFIG_BOOKE) */
/* Bit definitions related to the TCR. */
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
--
Dave Kleikamp
IBM Linux Technology Center
More information about the Linuxppc-dev
mailing list