[PATCH] powerpc: Add coherent_dma_mask to mv64x60 devices

[Corey Minyard]

From: Corey Minyard <cminyard at mvista.com>

DMA ops requires that coherent_dma_mask be set properly for a device,
but this was not being done for devices on the MV64x60 that use DMA.
Both the serial and ethernet devices need this or they won't be able
to allocate memory.

Signed-off-by: Corey Minyard <cminyard at mvista.com>
---
Mark Greer pointed me to the right place, I believe this is the
correct way to handle the problem.

Index: linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/mv64x60_dev.c
+++ linux-2.6/arch/powerpc/sysdev/mv64x60_dev.c
@@ -16,6 +16,7 @@
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/prom.h>
 
@@ -189,6 +190,7 @@ static int __init mv64x60_mpsc_device_se
 	pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
 	if (!pdev)
 		return -ENOMEM;
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	err = platform_device_add_resources(pdev, r, 5);
 	if (err)
@@ -302,6 +304,7 @@ static int __init mv64x60_eth_device_set
 	if (!pdev)
 		return -ENOMEM;
 
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 	err = platform_device_add_resources(pdev, r, 1);
 	if (err)
 		goto error;