[PATCH v5] ppc44x:PHY fixup for USB on canyonlands board
Rupjyoti Sarmah
rsarmah at amcc.com
Thu Dec 9 15:24:01 EST 2010
This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands.
Signed-off-by: Rupjyoti Sarmah <rsarmah at apm.com>
---
changes from previous version:
-- dts node correction, removed the address and size parameters
-- Kconfig file updated removing dependency on PPC44x_SIMPLE
-- 44x prefixes in the function names changed
-- Error paths updated in canyonlands.c
arch/powerpc/boot/dts/canyonlands.dts | 11 +++
arch/powerpc/platforms/44x/44x.h | 4 +
arch/powerpc/platforms/44x/Kconfig | 1 -
arch/powerpc/platforms/44x/Makefile | 1 +
arch/powerpc/platforms/44x/canyonlands.c | 125 ++++++++++++++++++++++++++++
arch/powerpc/platforms/44x/ppc44x_simple.c | 1 -
6 files changed, 141 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/platforms/44x/canyonlands.c
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index a303703..8ff1f3f 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -224,6 +224,11 @@
};
};
+ cpld at 2,0 {
+ compatible = "amcc,ppc460ex-bcsr";
+ reg = <2 0x0 0x9>;
+ };
+
ndfc at 3,0 {
compatible = "ibm,ndfc";
reg = <0x00000003 0x00000000 0x00002000>;
@@ -320,6 +325,12 @@
interrupts = <0x3 0x4>;
};
+ GPIO0: gpio at ef600b00 {
+ compatible = "ibm,ppc4xx-gpio";
+ reg = <0xef600b00 0x00000048>;
+ gpio-controller;
+ };
+
ZMII0: emac-zmii at ef600d00 {
compatible = "ibm,zmii-460ex", "ibm,zmii";
reg = <0xef600d00 0x0000000c>;
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index dbc4d2b..63f703e 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -4,4 +4,8 @@
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
+#define GPIO0_OSRH 0xC
+#define GPIO0_TSRH 0x14
+#define GPIO0_ISR1H 0x34
+
#endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0f979c5..f485fc5 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -115,7 +115,6 @@ config CANYONLANDS
bool "Canyonlands"
depends on 44x
default n
- select PPC44x_SIMPLE
select 460EX
select PCI
select PPC4xx_PCI_EXPRESS
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 82ff326..6854e73 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
+obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 0000000..9639709
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,125 @@
+/*
+ * This contain platform specific code for APM PPC460EX based Canyonlands
+ * board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Rupjyoti Sarmah <rsarmah at apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include "44x.h"
+
+#define BCSR_USB_EN 0x11
+
+static __initdata struct of_device_id ppc460ex_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init ppc460ex_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(canyonlands, ppc460ex_device_probe);
+
+/* Using this code only for the Canyonlands board. */
+
+static int __init ppc460ex_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) {
+ ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
+ return 1;
+ }
+ return 0;
+}
+
+/* USB PHY fixup code on Canyonlands kit. */
+
+static int __init ppc460ex_canyonlands_fixup(void)
+{
+ u8 __iomem *bcsr ;
+ void __iomem *vaddr;
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr");
+ if (!np) {
+ printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n");
+ return -ENODEV;
+ }
+
+ bcsr = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!bcsr) {
+ printk(KERN_CRIT "Could not remap bcsr\n");
+ ret = -ENODEV;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio");
+ vaddr = of_iomap(np, 0);
+ if (!vaddr) {
+ printk(KERN_CRIT "Could not get gpio node address\n");
+ ret = -ENODEV;
+ goto err_bcsr;
+ }
+ /* Disable USB, through the BCSR7 bits */
+ setbits8(&bcsr[7], BCSR_USB_EN);
+
+ /* Wait for a while after reset */
+ msleep(100);
+
+ /* Enable USB here */
+ clrbits8(&bcsr[7], BCSR_USB_EN);
+
+ /*
+ * Configure multiplexed gpio16 and gpio19 as alternate1 output
+ * source after USB reset. In this configuration gpio16 will be
+ * USB2HStop and gpio19 will be USB2DStop. For more details refer to
+ * table 34-7 of PPC460EX user manual.
+ */
+ setbits32((vaddr + GPIO0_OSRH), 0x42000000);
+ setbits32((vaddr + GPIO0_TSRH), 0x42000000);
+ of_node_put(np);
+err_bcsr:
+ iounmap(bcsr);
+ return ret;
+}
+machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup);
+define_machine(canyonlands) {
+ .name = "Canyonlands",
+ .probe = ppc460ex_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 7ddcba3..c81c19c 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -53,7 +53,6 @@ static char *board[] __initdata = {
"amcc,arches",
"amcc,bamboo",
"amcc,bluestone",
- "amcc,canyonlands",
"amcc,glacier",
"ibm,ebony",
"amcc,eiger",
--
1.5.6.3
More information about the Linuxppc-dev
mailing list