MPC831x (and others?) NAND erase performance improvements

[Scott Wood]

On Wed, 8 Dec 2010 20:57:03 +0100
Joakim Tjernlund <joakim.tjernlund at transmode.se> wrote:

> Mark Mason <mason at postdiluvian.org> wrote on 2010/12/08 20:26:16:
> >
> > Joakim Tjernlund <joakim.tjernlund at transmode.se> wrote:
> >
> > > Scott Wood <scottwood at freescale.com> wrote on 2010/12/08 18:18:39:
> > > >
> > > > On Wed, 8 Dec 2010 08:59:49 +0100
> > > > Joakim Tjernlund <joakim.tjernlund at transmode.se> wrote:
> > > >
> > > > > > If you attach NAND to the LBC, you should not attach anything else to
> > > > > > it which is latency-sensitive.
> > > > >
> > > > > This "feature" makes the LBC useless to us. Is there some workaround or plan
> > > > > to address this limitation?
> > > >
> > > > Complain to your support or sales contact.
> > > >
> > > > I've complained about it in the past, and got a "but pins are a limited
> > > > resource!" response.  They need to hear that it's a problem from
> > > > customers.
> > >
> > > Done, lets see what I get in return. I think this problem will be
> > > a major obstacle for our next generation boards which will be NAND
> > > based.
> >
> > It was a big problem, and a big surprise, for me too.  The next
> > generation of a couple of the chips on the bus have pcie, but those
> > are noticably more expensive.
> 
> Can you think of any workaround such as not connecting the BUSY pin at all?

Maybe connect the busy pin to a gpio?

-Scott