[PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt handler for sRIO.

[Bounine, Alexandre]

I think they should follow the previous two that are in Kumar's tree.

Probably Kumar may give you a better timeline estimate for this.   

 

Alex.

 

From: linuxppc-dev-bounces+alexandre.bounine=idt.com at lists.ozlabs.org
[mailto:linuxppc-dev-bounces+alexandre.bounine=idt.com at lists.ozlabs.org]
On Behalf Of Xie Shaohui-B21989
Sent: Thursday, December 02, 2010 10:29 PM
To: Bounine, Alexandre; linuxppc-dev at lists.ozlabs.org
Cc: akpm at linux-foundation.org; Gala Kumar-B11780; Li Yang-R58472; Zang
Roy-R61911
Subject: RE: [PATCH 2/2][v3] rapidio,powerpc/85xx: Error interrupt
handler for sRIO.

 

Hi Alex,

 

May I ask when would these patches be applied to mainline?

 

 

Best Regards, 
Shaohui Xie 

 

From: Bounine, Alexandre [mailto:Alexandre.Bounine at idt.com] 
Sent: Wednesday, December 01, 2010 4:49 AM
To: Xie Shaohui-B21989; linuxppc-dev at lists.ozlabs.org
Cc: akpm at linux-foundation.org; Li Yang-R58472; Gala Kumar-B11780; Zang
Roy-R61911
Subject: RE: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt
handler for sRIO.

 

Applies correctly now. Lab tested on 8548/RIO setup.

Alex.

> -----Original Message-----
> From: Shaohui Xie [mailto:b21989 at freescale.com]
> Sent: Thursday, November 18, 2010 1:58 AM
> To: linuxppc-dev at lists.ozlabs.org
> Cc: akpm at linux-foundation.org; Shaohui Xie; Li Yang; Kumar Gala; Roy
Zang; Bounine, Alexandre
> Subject: [PATCH 2/2][v3] rapidio, powerpc/85xx: Error interrupt
handler for sRIO.
>
> The sRIO controller reports errors to the core with one signal, it
uses
> register EPWISR to provides the core quick access to where the error
occurred.
> The EPWISR indicates that there are 4 interrupts sources, port1,
port2, message
> unit and port write receive, but the sRIO driver does not support
port2
> for now, still the handler takes care of port2.
> Currently the handler only clear error status without any recovery.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20101203/9998bc5a/attachment-0001.html>