[PATCH] booting-without-of: Remove nonexistent chapters from TOC, fix numbering

[Grant Likely]

On Wed, Aug 11, 2010 at 08:56:03PM +0400, Anton Vorontsov wrote:
> Marvell and GPIO bindings live in their own files, so the TOC should not
> mention them.
> 
> Also fix chapters numbering.
> 
> Signed-off-by: Anton Vorontsov <avorontsov at mvista.com>

Applied, thanks.

g.

> ---
>  Documentation/powerpc/booting-without-of.txt |   31 +------------------------
>  1 files changed, 2 insertions(+), 29 deletions(-)
> 
> diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
> index 46d2210..3f454b7 100644
> --- a/Documentation/powerpc/booting-without-of.txt
> +++ b/Documentation/powerpc/booting-without-of.txt
> @@ -49,40 +49,13 @@ Table of Contents
>        f) MDIO on GPIOs
>        g) SPI busses
>  
> -  VII - Marvell Discovery mv64[345]6x System Controller chips
> -    1) The /system-controller node
> -    2) Child nodes of /system-controller
> -      a) Marvell Discovery MDIO bus
> -      b) Marvell Discovery ethernet controller
> -      c) Marvell Discovery PHY nodes
> -      d) Marvell Discovery SDMA nodes
> -      e) Marvell Discovery BRG nodes
> -      f) Marvell Discovery CUNIT nodes
> -      g) Marvell Discovery MPSCROUTING nodes
> -      h) Marvell Discovery MPSCINTR nodes
> -      i) Marvell Discovery MPSC nodes
> -      j) Marvell Discovery Watch Dog Timer nodes
> -      k) Marvell Discovery I2C nodes
> -      l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
> -      m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
> -      n) Marvell Discovery GPP (General Purpose Pins) nodes
> -      o) Marvell Discovery PCI host bridge node
> -      p) Marvell Discovery CPU Error nodes
> -      q) Marvell Discovery SRAM Controller nodes
> -      r) Marvell Discovery PCI Error Handler nodes
> -      s) Marvell Discovery Memory Controller nodes
> -
> -  VIII - Specifying interrupt information for devices
> +  VII - Specifying interrupt information for devices
>      1) interrupts property
>      2) interrupt-parent property
>      3) OpenPIC Interrupt Controllers
>      4) ISA Interrupt Controllers
>  
> -  IX - Specifying GPIO information for devices
> -    1) gpios property
> -    2) gpio-controller nodes
> -
> -  X - Specifying device power management information (sleep property)
> +  VIII - Specifying device power management information (sleep property)
>  
>    Appendix A - Sample SOC node for MPC8540
>  
> -- 
> 1.7.0.5