mpc870: hctosys.c unable to open rtc device rtc0

[Shawn Jin]

>> Reading the fsl i2c bindings in the documentation, I found an example
>> as follows.
>>   27      i2c at 860 {
>>   28                compatible = "fsl,mpc823-i2c",
>>   29                             "fsl,cpm1-i2c";
>>   30                reg = <0x860 0x20 0x3c80 0x30>;
>>   31                interrupts = <16>;
>>   32                interrupt-parent = <&CPM_PIC>;
>>   33                fsl,cpm-command = <0x10>;
>>   34                #address-cells = <1>;
>>   35                #size-cells = <0>;
>>   36
>>   37                rtc at 68 {
>>   38                        compatible = "dallas,ds1307";
>>   39                        reg = <0x68>;
>>   40                };
>>   41        };
>>   42
>>
>> In the above example the rtc was explicitly declared as a subnode of
>> the i2c node. Is this the way to connect (or bind) a RTC to the I2C
>> driver?
>
> Yes.

Thanks Scott for the confirmation. I added that to my dts file and the
driver did try to probe the device. But accessing the device timed
out. There are some microcode patches related to I2C that I've not
applied. I'll try the patch(es) later. But how can I find out which
patch should be applied to my MPC870?

Thanks,
-Shawn.