[PATCH] powerpc/4xx: Add optional "reset_type" property to control reboot via dts
Stefan Roese
sr at denx.de
Mon Apr 26 23:39:01 EST 2010
By setting "reset_type" to one of the following values, the default
software reset mechanism may be overidden. Here the possible values of
"reset_type":
1 - PPC4xx core reset
2 - PPC4xx chip reset
3 - PPC4xx system reset (default)
This will be used by a new PPC440SPe board port, which needs a "chip
reset" instead of the default "system reset" to be asserted.
Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Josh Boyer <jwboyer at linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
arch/powerpc/sysdev/ppc4xx_soc.c | 17 +++++++++++++++--
1 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
index 5c01435..fe54216 100644
--- a/arch/powerpc/sysdev/ppc4xx_soc.c
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -191,11 +191,24 @@ static int __init ppc4xx_l2c_probe(void)
arch_initcall(ppc4xx_l2c_probe);
/*
- * At present, this routine just applies a system reset.
+ * Apply a system reset. Alternatively a board specific value may be
+ * provided via the "reset-type" property in the cpu node.
*/
void ppc4xx_reset_system(char *cmd)
{
- mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+ struct device_node *np;
+ u32 reset_type = DBCR0_RST_SYSTEM;
+ const u32 *prop;
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np) {
+ prop = of_get_property(np, "reset-type", NULL);
+ if (prop)
+ reset_type = prop[0] << 28;
+ }
+
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
+
while (1)
; /* Just in case the reset doesn't work */
}
--
1.7.1
More information about the Linuxppc-dev
mailing list