[PATCH] powerpc/e500mc: Implement machine check handler.
Kumar Gala
galak at kernel.crashing.org
Thu Apr 8 15:24:28 EST 2010
From: Scott Wood <scottwood at freescale.com>
Most of the MSCR bit assigments are different in e500mc versus
e500, and they are now write-one-to-clear.
Some e500mc machine check conditions are made recoverable (as long as
they aren't stuck on), most notably L1 instruction cache parity errors.
Signed-off-by: Scott Wood <scottwood at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/include/asm/cputable.h | 1 +
arch/powerpc/include/asm/reg_booke.h | 33 +++++++++----
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/kernel/traps.c | 86 ++++++++++++++++++++++++++++++++++
4 files changed, 111 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index abb833b..5536a2c 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -70,6 +70,7 @@ struct pt_regs;
extern int machine_check_generic(struct pt_regs *regs);
extern int machine_check_4xx(struct pt_regs *regs);
extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
extern int machine_check_e500(struct pt_regs *regs);
extern int machine_check_e200(struct pt_regs *regs);
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 414d434..7a8dbff 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -4,6 +4,12 @@
* are not true Book E PowerPCs, they borrowed a number of features
* before Book E was finalized, and are included here as well. Unfortunatly,
* they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
#ifdef __KERNEL__
#ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU 0x239 /* Machine Check Address Register Upper */
#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
#define SPRN_MCSR 0x23C /* Machine Check Status Register */
@@ -192,8 +199,11 @@
#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
#ifdef CONFIG_E500
+/* All e500 */
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */
#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */
#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */
@@ -205,12 +215,20 @@
#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */
#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
- MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
- MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
- MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV 0x00080000UL /* MCAR address valid */
+#define MCSR_MEA 0x00040000UL /* MCAR is effective address */
+#define MCSR_IF 0x00010000UL /* Instruction Fetch */
+#define MCSR_LD 0x00008000UL /* Load */
+#define MCSR_ST 0x00004000UL /* Store */
+#define MCSR_LDG 0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */
#endif
+
#ifdef CONFIG_E200
#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */
#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */
@@ -221,11 +239,6 @@
#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */
#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered
store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
- MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
- MCSR_BUS_WRERR)
#endif
/* Bit definitions for the DBSR. */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 8af4949..c6c9563 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1811,7 +1811,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.oprofile_cpu_type = "ppc/e500mc",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e500mc,
- .machine_check = machine_check_e500,
+ .machine_check = machine_check_e500mc,
.platform = "ppce500mc",
},
{ /* default match */
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 696626a..862cac2 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 1995-1996 Gary Thomas (gdt at linuxppc.org)
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -382,6 +383,91 @@ int machine_check_440A(struct pt_regs *regs)
return 0;
}
#elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+ unsigned long mcsr = mfspr(SPRN_MCSR);
+ unsigned long reason = mcsr;
+ int recoverable = 1;
+
+ printk("Machine check in kernel mode.\n");
+ printk("Caused by (from MCSR=%lx): ", reason);
+
+ if (reason & MCSR_MCP)
+ printk("Machine Check Signal\n");
+
+ if (reason & MCSR_ICPERR) {
+ printk("Instruction Cache Parity Error\n");
+
+ /*
+ * This is recoverable by invalidating the i-cache.
+ */
+ mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+ while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+ ;
+
+ /*
+ * This will generally be accompanied by an instruction
+ * fetch error report -- only treat MCSR_IF as fatal
+ * if it wasn't due to an L1 parity error.
+ */
+ reason &= ~MCSR_IF;
+ }
+
+ if (reason & MCSR_DCPERR_MC) {
+ printk("Data Cache Parity Error\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_L2MMU_MHIT) {
+ printk("Hit on multiple TLB entries\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_NMI)
+ printk("Non-maskable interrupt\n");
+
+ if (reason & MCSR_IF) {
+ printk("Instruction Fetch Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_LD) {
+ printk("Load Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_ST) {
+ printk("Store Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_LDG) {
+ printk("Guarded Load Error Report\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_TLBSYNC)
+ printk("Simultaneous tlbsync operations\n");
+
+ if (reason & MCSR_BSL2_ERR) {
+ printk("Level 2 Cache Error\n");
+ recoverable = 0;
+ }
+
+ if (reason & MCSR_MAV) {
+ u64 addr;
+
+ addr = mfspr(SPRN_MCAR);
+ addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+ printk("Machine Check %s Address: %#llx\n",
+ reason & MCSR_MEA ? "Effective" : "Physical", addr);
+ }
+
+ mtspr(SPRN_MCSR, mcsr);
+ return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
int machine_check_e500(struct pt_regs *regs)
{
unsigned long reason = get_mc_reason(regs);
--
1.6.0.6
More information about the Linuxppc-dev
mailing list