[PATCH] [V3] Add non-Virtex5 support for LL TEMAC driver

[Grant Likely]

On Mon, Apr 5, 2010 at 3:11 PM, John Linn <john.linn at xilinx.com> wrote:
> This patch adds support for using the LL TEMAC Ethernet driver on
> non-Virtex 5 platforms by adding support for accessing the Soft DMA
> registers as if they were memory mapped instead of solely through the
> DCR's (available on the Virtex 5).
>
> The patch also updates the driver so that it runs on the MicroBlaze.
> The changes were tested on the PowerPC 440, PowerPC 405, and the
> MicroBlaze platforms.
>
> Signed-off-by: John Tyner <jtyner at cs.ucr.edu>
> Signed-off-by: John Linn <john.linn at xilinx.com>
>
> ---
>
> V2 - Incorporated comments from Grant and added more logic to allow the driver
> to work on MicroBlaze.
>
> V3 - Only updated it to apply to head, minor change to include slab.h. Also
> verified that it now builds for MicroBlaze. Retested on PowerPC and MicroBlaze.
> ---
>  drivers/net/Kconfig         |    1 -
>  drivers/net/ll_temac.h      |   17 +++++-
>  drivers/net/ll_temac_main.c |  124 ++++++++++++++++++++++++++++++++++---------
>  3 files changed, 113 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 0ba5b8e..17044dc 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -2435,7 +2435,6 @@ config MV643XX_ETH
>  config XILINX_LL_TEMAC
>        tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
>        select PHYLIB
> -       depends on PPC_DCR_NATIVE
>        help
>          This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
>          core used in Xilinx Spartan and Virtex FPGAs


This still at the very least needs to depend on CONFIG_OF.  Otherwise
allmodconfig and allyesconfig on x86 and others will break.  The
driver also doesn't build on sparc, so you'll need to either exclude
CONFIG_SPARC or depend on (PPC || MICROBLAZE) too.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.