FPGA access over PCI-E on MPC8536

[Felix Radensky]

Hi, Benjamin

Benjamin Herrenschmidt wrote:
>>> However when I attempt to access FPGA memory my mmapping it in  
>>> userspace the read hangs. The same happens in kernel space. Does it  
>>> happen because FPGA memory is marked as disabled, or because FPGA  
>>> code is doing something wrong ?
>> Can you access the device in u-boot?  That would possible tell you if  
>> the HW is functioning or not.
>>
>>> Another question is what can cause PCI device memory be marked as
>>> disabled.
>> Good question, no idea how lspci decided to print [disabled].  Take a  
>> look at lspci source and see :)
> 
> Maybe the memory enable in the PCI command register isn't set ?
> 
> If you don't have a kernel driver that sets it (by calling
> pci_enable_device) and u-boot doesn't set it then it's going
> to be off and you'll get hangs or machine checks trying to
> access the device...
> 
> Just an idea...

Yes, that was my problem exactly ! Setting this bit via setpci
fixed it.

Thanks a lot for your help.

Felix