Powerpc Kernel 2.6.26.5 boot panic when call cfi_probe_chip()
g r1x
gr1xmail at gmail.com
Sat Sep 19 01:37:56 EST 2009
I'm working on a 440GX demo board with a flash chip s29gl256p(128k sector
size, 32M total, CFI). I have tried 2 ways to add mtd partiton to the
kernel, but failed with kernel panic. (kernel version: 2.6.26.5)
1. device tree, based on taishan board's dts.
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,cerberus";
compatible = "amcc,cerberus";
dcr-parent = <&{/cpus/cpu at 0}>;
aliases {
ethernet0 = &EMAC2;
ethernet1 = &EMAC3;
serial0 = &UART0;
serial1 = &UART1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu at 0 {
device_type = "cpu";
model = "PowerPC,440GX";
reg = <0x00000000>;
clock-frequency = <0x1DCD6500>; // 500MHz, 2FAF0800 800MHz
timebase-frequency = <0>; // Fix Me
i-cache-line-size = <0x32>;
d-cache-line-size = <0x32>;
i-cache-size = <0x8000>; /* 32 kB */
d-cache-size = <0x8000>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x10000000>; // Fix me
};
UICB0: interrupt-controller-base {
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <0x3>;
dcr-reg = <0x200 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <0x2>;
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
interrupt-parent = <&UICB0>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <2>; /* was 1 */
dcr-reg = <0x210 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
CPC0: cpc {
compatible = "ibm,cpc-440gp";
dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
// FIXME: anything else?
};
L2C0: l2c {
compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
0x030 0x008>; /* L2 cache DCR's */
cache-line-size = <0x20>; /* 32 bytes */
cache-size = <0x40000>; /* L2, 256K */
interrupt-parent = <&UIC2>;
interrupts = <0x17 0x1>;
};
plb {
compatible = "ibm,plb-440gx", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0x9896800>; // 160MHz, fixed me
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
dcr-reg = <0x010 0x002>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
dcr-reg = <0x020 0x008 0x00a 0x001>;
};
DMA0: dma {
// FIXME: ???
compatible = "ibm,dma-440gp";
dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
/*RXEOB*/ 0x1 &UIC0 0xb 0x4
/*SERR*/ 0x2 &UIC1 0x0 0x4
/*TXDE*/ 0x3 &UIC1 0x1 0x4
/*RXDE*/ 0x4 &UIC1 0x2 0x4>;
interrupt-map-mask = <0xffffffff>;
};
PCIDMA: pci_dma {
compatible = "ibm,pci_dma_440gx","ibm,pci_dma";
interrupt-parent = <&PCIDMA>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupts = <0x0 0x1 0x2 0x3>;
interrupt-map = < /* PCI MSG IN */ 0x0 &UIC0 0x4 0x4
/* DMAChannel0 */ 0x1 &UIC0 0xc 0x4
/* DMAChannel1 */ 0x2 &UIC0 0xd 0x4
/* IRQ5 */ 0x3 &UIC0 0x1c 0x3>;
interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-440gx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
ranges = <0x00000000 0x00000001 0x00000000 0x80000000
0x80000000 0x00000001 0x80000000 0x80000000>;
dcr-reg = <0x090 0x00b>;
interrupt-parent = <&UIC1>;
interrupts = <0x7 0x4>;
clock-frequency = <0x4C4B400>; // 80MHz
EBC0: ebc {
compatible = "ibm,ebc-440gx", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0x4C4B400>; // 80MHz
/* ranges property is supplied by zImage
* based on firmware's configuration of the
* EBC bridge */
interrupts = <0x5 0x4>;
interrupt-parent = <&UIC1>;
nor_flash at 0,0 {
compatible = "cfi-flash";
bank-width = <2>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x2000000>;
partition at 0 {
label = "user";
reg = <0x0 0x1000000>;
};
partition at 1000000 {
label = "root";
reg = <0x1000000 0xB00000>;
};
partition at 1B00000 {
label = "kernel";
reg = <0x1B00000 0x480000>;
};
partition at 1F80000 {
label = "fdt";
reg = <0x1F80000 0x20000>;
};
partition at 1FA0000 {
label = "env";
reg = <0x1FA0000 0x20000>;
};
partition at 1FC0000 {
label = "u-boot";
reg = <0x1fc0000 0x40000>;
};
};
};
UART0: serial at 40000200 {
device_type = "serial";
compatible = "ns16550";
reg = <0x40000200 0x00000008>;
virtual-reg = <0xe0000200>;
clock-frequency = <0xA8C000>;
current-speed = <0x1C200>; /* 115200 */
interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
UART1: serial at 40000300 {
device_type = "serial";
compatible = "ns16550";
reg = <0x40000300 0x00000008>;
virtual-reg = <0xe0000300>;
clock-frequency = <0xA8C000>;
current-speed = <0x1C200>; /* 115200 */
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
IIC0: i2c at 40000400 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
reg = <0x40000400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
index = <0>;
/* clock-frequency = <0x186a0>; */
};
IIC1: i2c at 40000500 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
reg = <0x40000500 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
index = <1>;
#address-cells = <0x1>;
#size-cells = <0>;
rtc at 68 {
compatible = "dallas,ds1338";
reg = <0x68>;
};
};
GPIO0: gpio at 40000700 {
/* FIXME */
compatible = "ibm,gpio-440gp";
reg = <0x40000700 0x00000020>;
};
ZMII0: emac-zmii at 40000780 {
compatible = "ibm,zmii-440gx", "ibm,zmii";
reg = <0x40000780 0x0000000c>;
};
RGMII0: emac-rgmii at 40000790 {
compatible = "ibm,rgmii";
reg = <0x40000790 0x00000008>;
};
TAH0: emac-tah at 40000b50 {
compatible = "ibm,tah-440gx", "ibm,tah";
reg = <0x40000b50 0x00000030>;
};
TAH1: emac-tah at 40000d50 {
compatible = "ibm,tah-440gx", "ibm,tah";
reg = <0x40000d50 0x00000030>;
};
EMAC0: ethernet at 40000800 {
unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
interrupts = <0x1c 0x4 0x1d 0x4>;
reg = <0x40000800 0x00000074>;
local-mac-address = [000000000000]; // Fill me
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <0x5DC>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rmii";
phy-map = <0x00000004>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
EMAC1: ethernet at 40000900 {
unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
interrupts = <0x1e 0x4 0x1f 0x4>;
reg = <0x40000900 0x00000074>;
local-mac-address = [000000000000]; // Fill me
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
max-frame-size = <0x5DC>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rmii";
phy-map = <0x00000003>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
EMAC2: ethernet at 40000c00 {
// unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
interrupts = <0x0 0x4 0x1 0x4>;
reg = <0x40000c00 0x00000074>;
local-mac-address = [000000000000]; // Fill me
mal-device = <&MAL0>;
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
max-frame-size = <0x2328>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rgmii";
phy-map = <0x00000002>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
zmii-channel = <2>;
tah-device = <&TAH0>;
tah-channel = <0>;
};
EMAC3: ethernet at 40000e00 {
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
interrupts = <0x2 0x4 0x3 0x4>;
reg = <0x40000e00 0x00000074>;
local-mac-address = [000000000000]; // Fill me
mal-device = <&MAL0>;
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
max-frame-size = <0x2328>;
rx-fifo-size = <0x1000>;
tx-fifo-size = <0x800>;
phy-mode = "rgmii";
phy-map = <0x00000001>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
zmii-channel = <3>;
tah-device = <&TAH1>;
tah-channel = <0>;
};
GPT0: gpt at 40000a00 {
/* FIXME */
reg = <0x40000a00 0x000000d4>;
interrupt-parent = <&UIC0>;
interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
};
};
PCIX0: pci at 20ec00000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
primary;
large-inbound-windows;
enable-msi-hole;
reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */
0x00000000 0x00000000 0x00000000 /* no IACK cycles */
0x00000002 0x0ed00000 0x00000004 /* Special cycles */
0x00000002 0x0ec80000 0x00000100 /* Internal registers */
0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
/* Type PCIAddr PLBAddr Size
* PCI Memory 0x80000000 0x380000000 2GB
* I/O 0x0 0x208000000 64KB
*/
ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000
0x80000000
0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000
0x00010000>;
/* Inbound 2GB range starting at 0 */
/* Type PCIAddr PLBAddr Size
* PCI Memory 0x0 0x0 2GB
* (prefetchable) (Fixed in linux?)
*/
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
0x0800 0x0 0x0 0x1 &UIC0 0x17 0x8
0x0800 0x0 0x0 0x2 &UIC0 0x18 0x8
0x0800 0x0 0x0 0x3 &UIC0 0x19 0x8
0x0800 0x0 0x0 0x4 &UIC0 0x1a 0x8
/* IDSEL 2 */
0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
>;
};
};
When kernel boots, panic happens
2. As I doubt error exists in dts, so I add a mtd map driver for the board
instead, but kernel boots panic all the same
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#define CFG_FLASH_BUS_WIDTH 2
#define CFG_FLASH_SIZE 0x2000000 /* Bytes */
#define CFG_FLASH_ADDR 0x1FE000000ULL
#define FLASH_MSG_PREFIX "S29GL-NOR:"
#define MTD_ID "s29gl-nor"
struct map_info s29gl_map = {
.name = "Nor Flash on Cerberus",
.size = CFG_FLASH_SIZE,
.bankwidth = CFG_FLASH_BUS_WIDTH,
};
static struct mtd_partition cerberus_partition[] = {
{
.name = "user",
.offset = 0x0,
.size = 0x1000000,
},
{
.name = "root",
.offset = 0x1000000,
.size = 0xB00000,
},
{
.name = "kernel",
.offset = 0x1B00000,
.size = 0x480000,
},
{
.name = "fdt",
.offset = 0x1F80000,
.size = 0x20000,
},
{
.name = "env",
.offset = 0x1FA0000,
.size = 0x20000,
},
{
.name = "u-boot",
.offset = 0x1FC0000,
.size = 0x40000,
}
};
static struct mtd_info *s29gl_mtd_info;
static struct mtd_partition *mtd_parts = 0;
int __init s29gl_init(void)
{
phys_addr_t flash_base = CFG_FLASH_ADDR;
printk(KERN_NOTICE FLASH_MSG_PREFIX "0x%08x at 0x%llx\n",
CFG_FLASH_SIZE,CFG_FLASH_ADDR);
s29gl_map.phys = flash_base;
s29gl_map.virt=ioremap(CFG_FLASH_ADDR,CFG_FLASH_SIZE);
if (!s29gl_map.virt){
printk(KERN_ERR FLASH_MSG_PREFIX"failed to ioremap\n");
return -EIO;
}
simple_map_init(&s29gl_map);
s29gl_mtd_info = do_map_probe("cfi_probe",&s29gl_map);
if (s29gl_mtd_info){
s29gl_mtd_info->owner=THIS_MODULE;
add_mtd_partitions(s29gl_mtd_info,cerberus_partition,
ARRAY_SIZE(cerberus_partition));
} else {
printk(KERN_ERR FLASH_MSG_PREFIX"Map probe failed\n");
iounmap((void*)s29gl_map.virt);
s29gl_map.virt=0;
}
}
static void __exit s29gl_exit(void)
{
if(s29gl_mtd_info){
del_mtd_partitions(s29gl_mtd_info);
map_destroy(s29gl_mtd_info);
}
if(s29gl_map.virt){
iounmap((void*)s29gl_map.virt);
s29gl_map.virt=0;
}
}
module_init(s29gl_init);
module_exit(s29gl_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MTD map and partition for 440GX boards");
---------------------kernel panic log------------------
/plb/opb/emac-rgmii at 40000790: input 0 in RGMII mode
eth0: EMAC-2 /plb/opb/ethernet at 40000c00, MAC 00:22:33:44:55:66
eth0: found Generic MII PHY (0x00)
/plb/opb/emac-rgmii at 40000790: input 1 in RGMII mode
eth1: EMAC-3 /plb/opb/ethernet at 40000e00, MAC 00:33:44:55:66:77
eth1: found Marvell 88E1111 Ethernet PHY (0x03)
S29GL-NOR:0x02000000 at 0x1fe000000
HERE1
Machine check in kernel mode.
Data Write PLB Error
Oops: Machine check, sig: 7 [#1]
Cerberus
Modules linked in:
NIP: c01943f8 LR: c018e5c8 CTR: c01943a0
REGS: c02daf50 TRAP: 0214 Not tainted (2.6.26.5)
MSR: 00029000 <EE,ME> CR: 42344a22 XER: 00000000
TASK = cf828000[1] 'swapper' THREAD: cf82c000
GPR00: 0000f0f0 cf82de50 cf828000 c02cd1a0 cf82de58 00000000 cf82de98 000000
GPR08: 00000000 d1180000 00000002 00000001 82344a22 40350100 c0256850 c02568
GPR16: c0256828 c0256810 cf82df98 c02b5de0 c02b0000 00000000 cf82de58 c02b00
GPR24: cf82df58 c02b5d7c 00000000 c02cd1a0 cf82de98 00000000 c02ccd1c c02cd1
NIP [c01943f8] simple_map_write+0x58/0x60
LR [c018e5c8] cfi_probe_chip+0xcc/0xeb4
Call Trace:
[cf82de50] [c001d5b4] printk+0x50/0x60 (unreliable)
[cf82de90] [c019404c] mtd_do_chip_probe+0xa4/0x3ac
[cf82df00] [c018e4ec] cfi_probe+0x1c/0x2c
[cf82df10] [c018e25c] do_map_probe+0x34/0x90
[cf82df30] [c02ac28c] s29gl_init+0x74/0xf0
[cf82df50] [c02971b0] kernel_init+0xa8/0x28c
[cf82dff0] [c000c3dc] kernel_thread+0x44/0x60
Instruction dump:
81230010 7c05492e 7c0004ac 4e800020 81230010 5400063e 7c0549ae 7c0004ac
4e800020 81230010 5400043e 7c054b2e <7c0004ac> 4e800020 81230018 2b890004
---[ end trace 5fac80aef6224e66 ]---
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 180 seconds..
The above panic log prints "HERE1" 'cause I changed mtd_do_chip_probe() as
follows.
struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe
*cp)
{
struct mtd_info *mtd = NULL;
struct cfi_private *cfi;
printk(KERN_WARNING "HERE1\n");
/* First probe the map to see if we have CFI stuff there. */
cfi = genprobe_ident_chips(map, cp);
printk(KERN_WARNING "HERE2\n");
if (!cfi)
return NULL;
printk(KERN_WARNING "HERE3\n");
map->fldrv_priv = cfi;
/* OK we liked it. Now find a driver for the command set it talks */
mtd = check_cmd_set(map, 1); /* First the primary cmdset */
printk(KERN_WARNING "HERE4\n");
if (!mtd){
mtd = check_cmd_set(map, 0); /* Then the secondary */
printk(KERN_WARNING "HERE5\n");
}
if (mtd) {
if (mtd->size > map->size) {
printk(KERN_WARNING "Reducing visibility of %ldKiB
chip to %ldKiB\n",
(unsigned long)mtd->size >> 10,
(unsigned long)map->size >> 10);
mtd->size = map->size;
}
printk(KERN_WARNING "HERE6\n");
return mtd;
}
printk(KERN_WARNING"gen_probe: No supported Vendor Command Set
found\n");
kfree(cfi->cfiq);
kfree(cfi);
map->fldrv_priv = NULL;
return NULL;
}
EXPORT_SYMBOL(mtd_do_chip_probe)
---------------------------------
Follow is my .config
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc2
# Fri Feb 15 21:40:44 2008
#
# CONFIG_PPC64 is not set
#
# Processor support
#
# CONFIG_6xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
CONFIG_44x=y
# CONFIG_E200 is not set
CONFIG_4xx=y
CONFIG_BOOKE=y
CONFIG_PTE_64BIT=y
CONFIG_PHYS_64BIT=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# Platform support
#
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_BAMBOO is not set
# CONFIG_EBONY is not set
# CONFIG_SEQUOIA is not set
# CONFIG_GALAXY=y is not set
CONFIG_CERBERUS=y
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
CONFIG_440GX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x01000000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#Allow userspace driver core code to be built
CONFIG_UIO=y
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
CONFIG_MTD_JEDECPROB=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
# CONFIG_MTD_CERBERUS is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XILINX_SYSACE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
CONFIG_MARVELL_PHY=y
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
CONFIG_IBM_NEW_EMAC_RXB=128
CONFIG_IBM_NEW_EMAC_TXB=64
CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
# CONFIG_IBM_NEW_EMAC_DEBUG is not set
CONFIG_IBM_NEW_EMAC_ZMII=y
CONFIG_IBM_NEW_EMAC_RGMII=y
CONFIG_IBM_NEW_EMAC_TAH=y
CONFIG_IBM_NEW_EMAC_EMAC4=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_TEXT_DEBUG=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_IBM_IIC=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_I2C_DEBUG_BUS=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is noet set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DEBUG=y
CONFIG_RTC_DRV_TEST=y
CONFIG_RTC_DRV_PPC=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DMADEVICES=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUGGER=y
CONFIG_KGDB=y
CONFIG_KGDB_TTYS0=y
# CONFIG_KGDB is not set
# CONFIG_XMON is not set
CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
#CONFIG_PPC_EARLY_DEBUG=y
CONFIG_EARLY_PRINTK=y
#CONFIG_PPC_EARLY_DEBUG_44x=y
#CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x40000200
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_SENSORS_EEPROM=y
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20090918/3099be74/attachment-0001.htm>
More information about the Linuxppc-dev
mailing list