RFC: delete UART current-speed from 4xx DTS?

[Benjamin Herrenschmidt]

On Tue, 2009-09-15 at 11:32 -0400, Josh Boyer wrote:
> On Tue, Sep 15, 2009 at 10:31:36AM -0400, Paul Gortmaker wrote:
> >One of the guys here was getting a messed up console on a bamboo board
> >(on linux boot), which he traced to the fact that the default dts has a
> >9600 baudrate coded into it (board was running 115k2, not 9600).  Either
> >deleting the line, or replacing the 9600 with zero fixed the problem.
> 
> Once booted, was there a valid current-speed property in /proc/device-tree
> for the serial node?  I'm curious if U-Boot created it, or if the kernel
> just used whatever baud was present already.
> 
> When I did the bamboo port a while ago, I recall having issues with either
> a missing clock-frequency or current-speed (or both perhaps) and the bootloader
> on the board was the original PIBS.  It might have been an issue with PIBS
> but I'm guessing the rest of the 4xx boards copied from either Ebony or
> Bamboo in their ports and hence contain that property.

I think I recently added code to legacy_serial probe the speed from the
HW if the property is absent, which should help.

Cheers,
Ben.