[PATCH] mpc5200: support for the MAN mpc5200 based board uc101
Heiko Schocher
hs at denx.de
Tue Sep 15 00:12:20 EST 2009
Hello Grant,
Grant Likely wrote:
> Thanks for the patch. Comments below.
>
> g.
>
> On Mon, Sep 14, 2009 at 2:05 AM, Heiko Schocher <hs at denx.de> wrote:
>> - serial Console on PSC1
>> - 64MB SDRAM
>> - MTD CFI Flash
>> - Ethernet FEC
>> - I2C with PCF8563 and Temp. Sensor ADM9240
>> - IDE support
>>
>> Signed-off-by: Heiko Schocher <hs at denx.de>
>> ---
>> - based on:
>> git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git next
>>
>> - checked with:
>>
>> $ ./scripts/checkpatch.pl 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch
>> total: 0 errors, 0 warnings, 1622 lines checked
>>
>> 0001-mpc5200-support-for-the-MAN-mpc5200-based-board-uc1.patch has no obvious style problems and is ready for submission.
>> $
>>
>> arch/powerpc/boot/dts/uc101.dts | 312 ++++++
>> arch/powerpc/configs/52xx/uc101_defconfig | 1303 ++++++++++++++++++++++++++
>
> I generally don't like board specific defconfigs unless there is a
> really compelling reason why it should be in the kernel tree. Please
> add the stuff you need (as modules!) to mpc5200_defconfig.
OK, thanks for spotting this. I take a look how this works.
> g.
>
>> diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
>> new file mode 100644
>> index 0000000..28e1c90
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/uc101.dts
>> @@ -0,0 +1,312 @@
>> +/*
>> + * uc101 board Device Tree Source
>> + *
>> + * Copyright (C) 2009 DENX Software Engineering GmbH
>> + * Heiko Schocher <hs at denx.de>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/ {
>> + model = "man,uc101";
>> + compatible = "man,uc101";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + interrupt-parent = <&mpc5200_pic>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + PowerPC,5200 at 0 {
>> + device_type = "cpu";
>> + reg = <0>;
>> + d-cache-line-size = <32>;
>> + i-cache-line-size = <32>;
>> + d-cache-size = <0x4000>; // L1, 16K
>> + i-cache-size = <0x4000>; // L1, 16K
>> + timebase-frequency = <0>; // from bootloader
>> + bus-frequency = <0>; // from bootloader
>> + clock-frequency = <0>; // from bootloader
>> + };
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x00000000 0x04000000>; // 64MB
>> + };
>> +
>> + soc5200 at f0000000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "fsl,mpc5200-immr";
>> + ranges = <0 0xf0000000 0x0000c000>;
>> + reg = <0xf0000000 0x00000100>;
>> + bus-frequency = <0>; // from bootloader
>> + system-frequency = <0>; // from bootloader
>> +
>> + cdm at 200 {
>> + compatible = "fsl,mpc5200-cdm";
>> + reg = <0x200 0x38>;
>> + };
>> +
>> + mpc5200_pic: interrupt-controller at 500 {
>> + // 5200 interrupts are encoded into two levels;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + compatible = "fsl,mpc5200-pic";
>> + reg = <0x500 0x80>;
>> + interrupts = <0 0 3>;
>> + };
>> +
>> + gpt1: timer at 610 { // General Purpose Timer 1 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x610 0x10>;
>> + interrupts = <1 10 0>;
>> + gpio-controller;
>> + };
>> +
>> + gpt2: timer at 620 { // General Purpose Timer 2 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x620 0x10>;
>> + interrupts = <1 11 0>;
>> + gpio-controller;
>> + };
>> +
>> + gpt3: timer at 630 { // General Purpose Timer 3 in GPIO mode
>> + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
>> + reg = <0x630 0x10>;
>> + interrupts = <1 12 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + gpio_simple: gpio at b00 {
>> + compatible = "fsl,mpc5200-gpio";
>> + reg = <0xb00 0x40>;
>> + interrupts = <1 7 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + gpio_wkup: gpio at c00 {
>> + compatible = "fsl,mpc5200-gpio-wkup";
>> + reg = <0xc00 0x40>;
>> + interrupts = <1 8 0 0 3 0>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + dma-controller at 1200 {
>> + device_type = "dma-controller";
>> + compatible = "fsl,mpc5200-bestcomm";
>> + reg = <0x1200 0x80>;
>> + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
>> + 3 4 0 3 5 0 3 6 0 3 7 0
>> + 3 8 0 3 9 0 3 10 0 3 11 0
>> + 3 12 0 3 13 0 3 14 0 3 15 0>;
>> + };
>> +
>> + xlb at 1f00 {
>> + compatible = "fsl,mpc5200-xlb";
>> + reg = <0x1f00 0x100>;
>> + };
>> +
>> + serial at 2000 { // PSC1
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2000 0x100>;
>> + interrupts = <2 1 0>;
>> + };
>> +
>> + serial at 2200 { // PSC2
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2200 0x100>;
>> + interrupts = <2 2 0>;
>> + };
>> +
>> + serial at 2c00 { // PSC6
>> + compatible = "fsl,mpc5200-psc-uart";
>> + reg = <0x2c00 0x100>;
>> + interrupts = <2 6 0>;
>> + };
>> +
>> + ethernet at 3000 {
>> + compatible = "fsl,mpc5200-fec";
>> + reg = <0x3000 0x400>;
>> + local-mac-address = [ 00 00 00 00 00 00 ];
>> + interrupts = <2 5 0>;
>> + phy-handle = <&phy0>;
>> + };
>> +
>> + mdio at 3000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,mpc5200-mdio";
>> + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
>> + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
>> +
>> + phy0: ethernet-phy at 0 {
>> + reg = <0>;
>
> For completeness, you should have a compatible property for the PHY
> here in the form "<vendor>,<part number>"
Ok, fix this.
>> + };
>> + };
>> +
>> + ata at 3a00 {
>> + compatible = "fsl,mpc5200-ata";
>> + reg = <0x3a00 0x100>;
>> + interrupts = <2 7 0>;
>> + };
>> +
>> + i2c at 3d40 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,mpc5200-i2c","fsl-i2c";
>> + reg = <0x3d40 0x40>;
>> + interrupts = <2 16 0>;
>> + fsl5200-clocking;
>
> I believe fsl5200-clocking is no longer required. There is a patch
> pending which removes this property from the other .dts files.
Ok, fix this.
>> +
>> + hwmon at 2c {
>> + compatible = "ad,adm9240";
>> + reg = <0x2c>;
>> + };
>> + rtc at 51 {
>> + compatible = "rtc,pcf8563";
>> + reg = <0x51>;
>> + };
>> + };
>> +
>> + sram at 8000 {
>> + compatible = "fsl,mpc5200-sram";
>> + reg = <0x8000 0x4000>;
>> + };
>> +
>> + };
>> +
>> + localbus {
>> + compatible = "fsl,mpc5200-lpb","simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <1>;
>> + ranges = <0 0 0xff800000 0x00800000
>> + 1 0 0x80000000 0x00800000
>> + 3 0 0x80000000 0x00800000>;
>> +
>> + flash at 0,0 {
>> + compatible = "cfi-flash";
>> + reg = <0 0 0x00800000>;
>> + bank-width = <2>;
>> + device-width = <2>;
>> + #size-cells = <1>;
>> + #address-cells = <1>;
>> + partition at 0 {
>> + label = "DTS";
>> + reg = <0x0 0x00100000>;
>> + };
>> + partition at 100000 {
>> + label = "Kernel";
>> + reg = <0x100000 0x00200000>;
>> + };
>> + partition at 300000 {
>> + label = "RootFS";
>> + reg = <0x00300000 0x00200000>;
>> + };
>> +
>> + partition at 500000 {
>> + label = "user";
>> + reg = <0x00500000 0x00200000>;
>> + };
>> + partition at 700000 {
>> + label = "U-Boot";
>> + reg = <0x00700000 0x00040000>;
>> + };
>> + partition at 740000 {
>> + label = "Env";
>> + reg = <0x00740000 0x00010000>;
>> + };
>> + partition at 750000 {
>> + label = "red. Env";
>> + reg = <0x00750000 0x00010000>;
>> + };
>> + partition at 760000 {
>> + label = "reserve";
>> + reg = <0x00760000 0x000a0000>;
>> + };
>> + };
>> +
>> + sram at 1,0 {
>> + compatible = "sram";
>> + reg = <1 0x100000 0x100000>;
>> + };
>> +
>> + gpio-controller-100 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>
> Here I see "manroland", but the top level model and compatible
> properties use "man". Which should it be (I suspect "manroland" is a
> better choice).
You are right, I change this too "manroland".
>> + reg = <3 0x00600100 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-104 at 3,0 {
>
> These names should be:
> gpio-controller at 3,600100
> gpio-controller at 3,600104
> gpio-controller at 3,600201
>
> etc.
OK, fix this.
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600104 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-200 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600200 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-201 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600201 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-202 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600202 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-203 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600203 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-204 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600204 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-206 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600206 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-207 at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x00600207 0x1>;
>> + gpio-controller;
>> + };
>> + gpio-controller-20f at 3,0 {
>> + #gpio-cells = <2>;
>> + compatible = "manroland,mucmc52-aux-gpio";
>> + reg = <3 0x0060020f 0x1>;
>> + gpio-controller;
>> + };
>> +
>> + display at 3,0 {
>
> similarly, this should be display at 3,600000
Ok.
>> + device_type = "pdsp-display";
>
> Drop device_type
Ok.
>> + compatible = "pdsp-display";
>
> No vendor prefix?
I take a look at this.
>> + reg = <3 0x00600000 0x1000>;
>> + };
>> + };
>> +
>> +};
Thanks for reviewing this patch
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the Linuxppc-dev
mailing list