AW: PowerPC PCI DMA issues (prefetch/coherency?)

Tom Burns tburns at datacast.com
Thu Sep 10 00:10:46 EST 2009


Hi Mikhail,

Sorry, this DMA code is in a tasklet.  Are you suggesting the processor 
is in supervisor mode at that time?  Calling pci_dma_sync_sg_for_cpu() 
from the tasklet context is what generates the OOPS.  The entire oops is 
as follows, if it's relevant:

Oops: kernel access of bad area, sig: 11 [#1]
NIP: c0003ab0 LR: c0010c30 CTR: 02400001
REGS: df117bd0 TRAP: 0300   Tainted: P         (2.6.24.2)
MSR: 00029000 <EE,ME>  CR: 44224042  XER: 20000000
DEAR: 3fd39000, ESR: 00800000
TASK = de5db7d0[157] 'cat' THREAD: df116000
GPR00: e11e5854 df117c80 de5db7d0 3fd39000 02400001 0000001f 00000002
0079a169
GPR08: 00000001 c0310000 00000000 c0010c84 24224042 101c0dac c0310000
10177000
GPR16: deb14200 df116000 e12062d0 e11f6104 de0f16c0 e11f0000 c0310000
e11f59cc
GPR24: e11f62d0 e11f0000 e11f0000 00000000 00000002 defee014 3fd39008
87d39009
NIP [c0003ab0] invalidate_dcache_range+0x1c/0x30
LR [c0010c30] __dma_sync+0x58/0xac
Call Trace:
[df117c80] [0000000a] 0xa (unreliable)
[df117c90] [e11e5854] DoTasklet+0x67c/0xc90 [ideDriverDuo_cyph]
[df117ce0] [c001ee24] tasklet_action+0x60/0xcc
[df117cf0] [c001ef04] __do_softirq+0x74/0xe0
[df117d10] [c00067a8] do_softirq+0x54/0x58
[df117d20] [c001edb4] irq_exit+0x48/0x58
[df117d30] [c00069d0] do_IRQ+0x6c/0xc0
[df117d40] [c00020e0] ret_from_except+0x0/0x18
[df117e00] [c00501e0] unmap_vmas+0x2c4/0x560
[df117e90] [c0053ebc] exit_mmap+0x64/0xec
[df117ec0] [c00171ac] mmput+0x50/0xd4
[df117ed0] [c001aef8] exit_mm+0x80/0xe0
[df117ef0] [c001c818] do_exit+0x134/0x6f8
[df117f30] [c001ce14] do_group_exit+0x38/0x74
[df117f40] [c0001a80] ret_from_syscall+0x0/0x3c
Instruction dump:
7c0018ac 38630020 4200fff8 7c0004ac 4e800020 38a0001f 7c632878 7c832050
7c842a14 5484d97f 4d820020 7c8903a6 <7c001bac> 38630020 4200fff8
7c0004ac
Kernel panic - not syncing: Aiee, killing interrupt handler!
Rebooting in 180 seconds..


Cheers,
Tom

Mikhail Zolotaryov wrote:
> Hi Tom,
>
> possible solution could be to use tasklet to perform DMA-related job 
> (as in most cases DMA transfer is interrupt driven - makes sense).
>
>
> Tom Burns wrote:
>> Hi,
>>
>> With the default config for the Sequoia board on 2.6.24, calling 
>> pci_dma_sync_sg_for_cpu() results in executing
>> invalidate_dcache_range() in arch/ppc/kernel/misc.S from 
>> __dma_sync().  This OOPses on PPC440 since it tries to call directly 
>> the assembly instruction dcbi, which can only be executed in 
>> supervisor mode.  We tried that before resorting to manual cache line 
>> management with usermode-safe assembly calls.
>>
>> Regards,
>> Tom Burns
>> International Datacasting Corporation
>>
>> Mikhail Zolotaryov wrote:
>>> Hi,
>>>
>>> Why manage cache lines  manually, if appropriate code is a part of 
>>> __dma_sync / dma_sync_single_for_device of DMA API ? (implies 
>>> CONFIG_NOT_COHERENT_CACHE enabled, as default for Sequoia Board)
>>>
>>> Prodyut Hazarika wrote:
>>>> Hi Adam,
>>>>
>>>>  
>>>>> Yes, I am using the 440EPx (same as the sequoia board). Our 
>>>>> ideDriver is DMA'ing blocks of 192-byte data over the PCI bus
>>>>>     
>>>> (using
>>>>  
>>>>> the Sil0680A PCI-IDE bridge). Most of the DMA's (depending on timing)
>>>>> end up being partially corrupted when we try to parse the data in the
>>>>> virtual page. We have confirmed the data is good before the PCI-IDE
>>>>> bridge. We are creating two 8K pages and map them to physical DMA
>>>>>     
>>>> memory
>>>>  
>>>>> using single-entry scatter/gather structs. When a DMA block is
>>>>> corrupted, we see a random portion of it (always a multiple of 16byte
>>>>> cache lines) is overwritten with old data from the last time the
>>>>>     
>>>> buffer
>>>>  
>>>>> was used.     
>>>>
>>>> This looks like a cache coherency problem.
>>>> Can you ensure that the TLB entries corresponding to the DMA region 
>>>> has
>>>> the CacheInhibit bit set.
>>>> You will need a BDI connected to your system.
>>>>
>>>> Also, you will need to invalidate and flush the lines appropriately,
>>>> since in 440 cores,
>>>> L1Cache coherency is managed entirely by software.
>>>> Please look at drivers/net/ibm_newemac/mal.c and core.c for example on
>>>> how to do it.
>>>>
>>>> Thanks
>>>> Prodyut
>>>>
>>>> On Thu, 2009-09-03 at 13:27 -0700, Prodyut Hazarika wrote:
>>>>  
>>>>> Hi Adam,
>>>>>
>>>>>  
>>>>>> Are you sure there is L2 cache on the 440?
>>>>>>       
>>>>> It depends on the SoC you are using. SoC like 460EX (Canyonlands
>>>>>     
>>>> board)
>>>>  
>>>>> have L2Cache.
>>>>> It seems you are using a Sequoia board, which has a 440EPx SoC. 
>>>>> 440EPx
>>>>> has a 440 cpu core, but no L2Cache.
>>>>> Could you please tell me which SoC you are using?
>>>>> You can also refer to the appropriate dts file to see if there is 
>>>>> L2C.
>>>>> For example, in canyonlands.dts (460EX based board), we have the L2C
>>>>> entry.
>>>>>         L2C0: l2c {
>>>>>               ...
>>>>>         }
>>>>>
>>>>>  
>>>>>> I am seeing this problem with our custom IDE driver which is 
>>>>>> based on
>>>>>>       
>>>>
>>>>  
>>>>>> pretty old code. Our driver uses pci_alloc_consistent() to allocate
>>>>>>       
>>>> the
>>>>  
>>>>>> physical DMA memory and alloc_pages() to allocate a virtual page. 
>>>>>> It then uses pci_map_sg() to map to a scatter/gather buffer. 
>>>>>> Perhaps I should convert these to the DMA API calls as you suggest.
>>>>>>       
>>>>> Could you give more details on the consistency problem? It is a good
>>>>> idea to change to the new DMA APIs, but pci_alloc_consistent() should
>>>>> work too
>>>>>
>>>>> Thanks
>>>>> Prodyut  On Thu, 2009-09-03 at 19:57 +1000, Benjamin Herrenschmidt 
>>>>> wrote:
>>>>>  
>>>>>> On Thu, 2009-09-03 at 09:05 +0100, Chris Pringle wrote:
>>>>>>    
>>>>>>> Hi Adam,
>>>>>>>
>>>>>>> If you have a look in include/asm-ppc/pgtable.h for the following
>>>>>>>         
>>>>> section:
>>>>>  
>>>>>>> #ifdef CONFIG_44x
>>>>>>> #define _PAGE_BASE    (_PAGE_PRESENT | _PAGE_ACCESSED |
>>>>>>>         
>>>>> _PAGE_GUARDED)
>>>>>  
>>>>>>> #else
>>>>>>> #define _PAGE_BASE    (_PAGE_PRESENT | _PAGE_ACCESSED)
>>>>>>> #endif
>>>>>>>
>>>>>>> Try adding _PAGE_COHERENT to the appropriate line above and see if
>>>>>>>         
>>>>> that  
>>>>>>> fixes your issue - this causes the 'M' bit to be set on the page
>>>>>>>         
>>>>> which  
>>>>>>> sure enforce cache coherency. If it doesn't, you'll need to check
>>>>>>>         
>>>>> the  
>>>>>>> 'M' bit isn't being masked out in head_44x.S (it was originally
>>>>>>>         
>>>>> masked  
>>>>>>> out on arch/powerpc, but was fixed in later kernels when the cache
>>>>>>>         
>>>>
>>>>  
>>>>>>> coherency issues with non-SMP systems were resolved).
>>>>>>>         
>>>>>> I have some doubts about the usefulness of doing that for 4xx.
>>>>>>       
>>>> AFAIK,
>>>>  
>>>>>> the 440 core just ignores M.
>>>>>>
>>>>>> The problem lies probably elsewhere. Maybe the L2 cache coherency
>>>>>>       
>>>>> isn't
>>>>>  
>>>>>> enabled or not working ?
>>>>>>
>>>>>> The L1 cache on 440 is simply not coherent, so drivers have to make
>>>>>>       
>>>>> sure
>>>>>  
>>>>>> they use the appropriate DMA APIs which will do cache flushing when
>>>>>> needed.
>>>>>>
>>>>>> Adam, what driver is causing you that sort of problems ?
>>>>>>
>>>>>> Cheers,
>>>>>> Ben.
>>>>>>
>>>>>>
>>>>>>       
>>>
>>>
>>
>>
>
>




More information about the Linuxppc-dev mailing list