[PATCH 1/6 v5] Kernel DLPAR Infrastructure
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu Oct 29 14:08:51 EST 2009
On Wed, 2009-10-28 at 15:53 -0500, Nathan Fontenot wrote:
> This patch provides the kernel DLPAR infrastructure in a new filed named
> dlpar.c. The functionality provided is for acquiring and releasing a resource
> from firmware and the parsing of information returned from the
> ibm,configure-connector rtas call. Additionally this exports the pSeries
> reconfiguration notifier chain so that it can be invoked when device tree
> updates are made.
>
> Signed-off-by: Nathan Fontenot <nfont at austin.ibm.com>
> ---
Hi Nathan !
Finally I get to review this stuff :-)
> +#define CFG_CONN_WORK_SIZE 4096
> +static char workarea[CFG_CONN_WORK_SIZE];
> +static DEFINE_SPINLOCK(workarea_lock);
So I'm not a huge fan of this workarea static. First a static is in
effect a global name (as far as System.map etc... are concerned) so it
would warrant a better name. Then, do we really want that 4K of BSS
taken even on platforms that don't do dlpar ? Any reason why you don't
just pop a free page with __get_free_page() inside of
configure_connector() ?
> +struct cc_workarea {
> + u32 drc_index;
> + u32 zero;
> + u32 name_offset;
> + u32 prop_length;
> + u32 prop_offset;
> +};
> +
> +static struct property *parse_cc_property(char *workarea)
> +{
> + struct property *prop;
> + struct cc_workarea *ccwa;
> + char *name;
> + char *value;
> +
> + prop = kzalloc(sizeof(*prop), GFP_KERNEL);
> + if (!prop)
> + return NULL;
> +
> + ccwa = (struct cc_workarea *)workarea;
> + name = workarea + ccwa->name_offset;
> + prop->name = kzalloc(strlen(name) + 1, GFP_KERNEL);
> + if (!prop->name) {
> + kfree(prop);
> + return NULL;
> + }
> +
> + strcpy(prop->name, name);
> +
> + prop->length = ccwa->prop_length;
> + value = workarea + ccwa->prop_offset;
> + prop->value = kzalloc(prop->length, GFP_KERNEL);
> + if (!prop->value) {
> + kfree(prop->name);
> + kfree(prop);
> + return NULL;
> + }
> +
> + memcpy(prop->value, value, prop->length);
> + return prop;
> +}
> +
> +static void free_property(struct property *prop)
> +{
> + kfree(prop->name);
> + kfree(prop->value);
> + kfree(prop);
> +}
> +
> +static struct device_node *parse_cc_node(char *work_area)
> +{
const char* maybe ?
> + struct device_node *dn;
> + struct cc_workarea *ccwa;
> + char *name;
> +
> + dn = kzalloc(sizeof(*dn), GFP_KERNEL);
> + if (!dn)
> + return NULL;
> +
> + ccwa = (struct cc_workarea *)work_area;
> + name = work_area + ccwa->name_offset;
I'm wondering whether work_area should be a struct cc_workarea * in the
first place with a char data[] at the end, but that would mean probably
tweaking the offsets... no big deal, up to you.
> + dn->full_name = kzalloc(strlen(name) + 1, GFP_KERNEL);
> + if (!dn->full_name) {
> + kfree(dn);
> + return NULL;
> + }
> +
> + strcpy(dn->full_name, name);
kstrdup ?
.../...
> +#define NEXT_SIBLING 1
> +#define NEXT_CHILD 2
> +#define NEXT_PROPERTY 3
> +#define PREV_PARENT 4
> +#define MORE_MEMORY 5
> +#define CALL_AGAIN -2
> +#define ERR_CFG_USE -9003
> +
> +struct device_node *configure_connector(u32 drc_index)
> +{
It's a global exported function, I'd rather you call it
dlpar_configure_connector()
> + struct device_node *dn;
> + struct device_node *first_dn = NULL;
> + struct device_node *last_dn = NULL;
> + struct property *property;
> + struct property *last_property = NULL;
> + struct cc_workarea *ccwa;
> + int cc_token;
> + int rc;
> +
> + cc_token = rtas_token("ibm,configure-connector");
> + if (cc_token == RTAS_UNKNOWN_SERVICE)
> + return NULL;
> +
> + spin_lock(&workarea_lock);
> +
> + ccwa = (struct cc_workarea *)&workarea[0];
> + ccwa->drc_index = drc_index;
> + ccwa->zero = 0;
Popping a free page with gfp (or just kmalloc'ing 4K) would avoid the
need for the lock too.
> + rc = rtas_call(cc_token, 2, 1, NULL, workarea, NULL);
> + while (rc) {
> + switch (rc) {
> + case NEXT_SIBLING:
> + dn = parse_cc_node(workarea);
> + if (!dn)
> + goto cc_error;
> +
> + dn->parent = last_dn->parent;
> + last_dn->sibling = dn;
> + last_dn = dn;
> + break;
> +
> + case NEXT_CHILD:
> + dn = parse_cc_node(workarea);
> + if (!dn)
> + goto cc_error;
> +
> + if (!first_dn)
> + first_dn = dn;
> + else {
> + dn->parent = last_dn;
> + if (last_dn)
> + last_dn->child = dn;
> + }
> +
> + last_dn = dn;
> + break;
> +
> + case NEXT_PROPERTY:
> + property = parse_cc_property(workarea);
> + if (!property)
> + goto cc_error;
> +
> + if (!last_dn->properties)
> + last_dn->properties = property;
> + else
> + last_property->next = property;
> +
> + last_property = property;
> + break;
> +
> + case PREV_PARENT:
> + last_dn = last_dn->parent;
> + break;
> +
> + case CALL_AGAIN:
> + break;
> +
> + case MORE_MEMORY:
> + case ERR_CFG_USE:
> + default:
> + printk(KERN_ERR "Unexpected Error (%d) "
> + "returned from configure-connector\n", rc);
> + goto cc_error;
> + }
> +
> + rc = rtas_call(cc_token, 2, 1, NULL, workarea, NULL);
> + }
> +
> + spin_unlock(&workarea_lock);
> + return first_dn;
> +
> +cc_error:
> + spin_unlock(&workarea_lock);
> +
> + if (first_dn)
> + free_cc_nodes(first_dn);
> +
> + return NULL;
> +}
> +
> +static struct device_node *derive_parent(const char *path)
> +{
> + struct device_node *parent;
> + char parent_path[128];
> + int parent_path_len;
> +
> + parent_path_len = strrchr(path, '/') - path + 1;
> + strlcpy(parent_path, path, parent_path_len);
> +
> + parent = of_find_node_by_path(parent_path);
> +
> + return parent;
> +}
This ...
> +static int add_one_node(struct device_node *dn)
> +{
> + struct proc_dir_entry *ent;
> + int rc;
> +
> + of_node_set_flag(dn, OF_DYNAMIC);
> + kref_init(&dn->kref);
> + dn->parent = derive_parent(dn->full_name);
> +
> + rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
> + PSERIES_RECONFIG_ADD, dn);
> + if (rc == NOTIFY_BAD) {
> + printk(KERN_ERR "Failed to add device node %s\n",
> + dn->full_name);
> + return -ENOMEM; /* For now, safe to assume kmalloc failure */
> + }
> +
> + of_attach_node(dn);
> +
> +#ifdef CONFIG_PROC_DEVICETREE
> + ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
> + if (ent)
> + proc_device_tree_add_node(dn, ent);
> +#endif
> +
> + of_node_put(dn->parent);
> + return 0;
> +}
... and this ...
> +int add_device_tree_nodes(struct device_node *dn)
> +{
> + struct device_node *child = dn->child;
> + struct device_node *sibling = dn->sibling;
> + int rc;
> +
> + dn->child = NULL;
> + dn->sibling = NULL;
> + dn->parent = NULL;
> +
> + rc = add_one_node(dn);
> + if (rc)
> + return rc;
> +
> + if (child) {
> + rc = add_device_tree_nodes(child);
> + if (rc)
> + return rc;
> + }
> +
> + if (sibling)
> + rc = add_device_tree_nodes(sibling);
> +
> + return rc;
> +}
... and this ...
> +static int remove_one_node(struct device_node *dn)
> +{
> + struct device_node *parent = dn->parent;
> + struct property *prop = dn->properties;
> +
> +#ifdef CONFIG_PROC_DEVICETREE
> + while (prop) {
> + remove_proc_entry(prop->name, dn->pde);
> + prop = prop->next;
> + }
> +
> + if (dn->pde)
> + remove_proc_entry(dn->pde->name, parent->pde);
> +#endif
> +
> + blocking_notifier_call_chain(&pSeries_reconfig_chain,
> + PSERIES_RECONFIG_REMOVE, dn);
> + of_detach_node(dn);
> + of_node_put(dn); /* Must decrement the refcount */
> +
> + return 0;
> +}
... and this ...
> +static int _remove_device_tree_nodes(struct device_node *dn)
> +{
> + int rc;
> +
> + if (dn->child) {
> + rc = _remove_device_tree_nodes(dn->child);
> + if (rc)
> + return rc;
> + }
> +
> + if (dn->sibling) {
> + rc = _remove_device_tree_nodes(dn->sibling);
> + if (rc)
> + return rc;
> + }
> +
> + rc = remove_one_node(dn);
> + return rc;
> +}
... repeat myself ...
> +int remove_device_tree_nodes(struct device_node *dn)
> +{
> + int rc;
> +
> + if (dn->child) {
> + rc = _remove_device_tree_nodes(dn->child);
> + if (rc)
> + return rc;
> + }
> +
> + rc = remove_one_node(dn);
> + return rc;
> +}
... should probably all go to something like drivers/of/dynamic.c or at
least for now arch/powerpc/kernel/of_dynamic.c along with everything
related to dynamically adding and removing nodes. I see that potentially
useful for more than just DLPAR (though DLPAR is the only user right
now) and should also all be prefixed with of_*
> +#define DR_ENTITY_SENSE 9003
> +#define DR_ENTITY_PRESENT 1
> +#define DR_ENTITY_UNUSABLE 2
> +#define ALLOCATION_STATE 9003
> +#define ALLOC_UNUSABLE 0
> +#define ALLOC_USABLE 1
> +#define ISOLATION_STATE 9001
> +#define ISOLATE 0
> +#define UNISOLATE 1
> +
> +int acquire_drc(u32 drc_index)
> +{
> + int dr_status, rc;
> +
> + rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
> + DR_ENTITY_SENSE, drc_index);
> + if (rc || dr_status != DR_ENTITY_UNUSABLE)
> + return -1;
> +
> + rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE);
> + if (rc)
> + return rc;
> +
> + rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
> + if (rc) {
> + rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +int release_drc(u32 drc_index)
> +{
> + int dr_status, rc;
> +
> + rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
> + DR_ENTITY_SENSE, drc_index);
> + if (rc || dr_status != DR_ENTITY_PRESENT)
> + return -1;
> +
> + rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE);
> + if (rc)
> + return rc;
> +
> + rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
> + if (rc) {
> + rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
> + return rc;
> + }
> +
> + return 0;
> +}
Both above should have a dlpar_* prefix
> +static int pseries_dlpar_init(void)
> +{
> + if (!machine_is(pseries))
> + return 0;
> +
> + return 0;
> +}
> +device_initcall(pseries_dlpar_init);
What the point ? :-)
Cheers
Ben.
More information about the Linuxppc-dev
mailing list