[PATCH] therm_adt746x: Don't access non-existing register

[Jean Delvare]

The ADT746x don't have any register at sub-address 0, so better use an
existing register for the initial test read.

Signed-off-by: Jean Delvare <khali at linux-fr.org>
Cc: Colin Leroy <colin at colino.net>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Paul Mackerras <paulus at samba.org>
---
Tim, I don't really expect this to solve your problem, but who knows...
Care to give it a try, just in case?

 drivers/macintosh/therm_adt746x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-2.6.32-rc4.orig/drivers/macintosh/therm_adt746x.c	2009-10-12 11:53:59.000000000 +0200
+++ linux-2.6.32-rc4/drivers/macintosh/therm_adt746x.c	2009-10-14 17:27:46.000000000 +0200
@@ -387,7 +387,7 @@ static int probe_thermostat(struct i2c_c
 	i2c_set_clientdata(client, th);
 	th->clt = client;
 
-	rc = read_reg(th, 0);
+	rc = read_reg(th, CONFIG_REG);
 	if (rc < 0) {
 		dev_err(&client->dev, "Thermostat failed to read config!\n");
 		kfree(th);


-- 
Jean Delvare