[PATCH 2/8] 8xx: Update TLB asm so it behaves as linux mm expects.

[Benjamin Herrenschmidt]

On Sun, 2009-10-11 at 18:35 +0200, Joakim Tjernlund wrote:
> @@ -522,26 +539,12 @@ DataTLBError:

I still think you should remove everything from DataTLBError, it's
just plain useless :-)

Ben.

>         mfspr   r11, SPRN_MD_TWC                /* ....and get the pte
> address */
>         lwz     r10, 0(r11)             /* Get the pte */
>  
> -       andi.   r11, r10, _PAGE_RW      /* Is it writeable? */
> -       beq     2f                      /* Bail out if not */
> -
> -       /* Update 'changed', among others.
> -       */
> -#ifdef CONFIG_SWAP
> -       ori     r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
> -       /* do not set the _PAGE_ACCESSED bit of a non-present page */
> -       andi.   r11, r10, _PAGE_PRESENT
> -       beq     4f
> -       ori     r10, r10, _PAGE_ACCESSED
> -4:
> -#else
> -       ori     r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
> -#endif
> -       mfspr   r11, SPRN_MD_TWC                /* Get pte address
> again */
> +       ori     r10, r10, _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HWWRITE
>         stw     r10, 0(r11)             /* and update pte in table */
> +       xori    r10, r10, _PAGE_RW      /* RW bit is inverted */
>  
>         /* The Linux PTE won't go exactly into the MMU TLB.
> -        * Software indicator bits 21, 22 and 28 must be clear.
> +        * Software indicator bits 22 and 28 must be clear.
>          * Software indicator bits 24, 25, 26, and 27 must be
>          * set.  All other Linux PTE bits control the behavior
>          * of the MMU.
> -- 
> 1.6.4.4
> 
>