[PATCH 4/6] 8xx: Tag DAR with 0x00f0 to catch buggy instructions.

[Joakim Tjernlund]

dcbz, dcbf, dcbi, dcbst and icbi do not set DAR when they
cause a DTLB Error. Dectect this by tagging DAR with 0x00f0
at every exception exit that modifies DAR.
Test for DAR=0x00f0 in DataTLBError and bail
to handle_page_fault().
---
 arch/powerpc/kernel/head_8xx.S |   19 ++++++++++++++++---
 1 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index b1f72d9..b93e32f 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -206,6 +206,8 @@ MachineCheck:
 	EXCEPTION_PROLOG
 	mfspr r4,SPRN_DAR
 	stw r4,_DAR(r11)
+	li r5,0x00f0
+	mtspr SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
 	mfspr r5,SPRN_DSISR
 	stw r5,_DSISR(r11)
 	addi r3,r1,STACK_FRAME_OVERHEAD
@@ -222,6 +224,8 @@ DataAccess:
 	stw	r10,_DSISR(r11)
 	mr	r5,r10
 	mfspr	r4,SPRN_DAR
+	li	r10,0x00f0
+	mtspr	SPRN_DAR,r10	/* Tag DAR, to be used in DTLB Error */
 	EXC_XFER_EE_LITE(0x300, handle_page_fault)
 
 /* Instruction access exception.
@@ -244,6 +248,8 @@ Alignment:
 	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_DAR
 	stw	r4,_DAR(r11)
+	li	r5,0x00f0
+	mtspr	SPRN_DAR,r5	/* Tag DAR, to be used in DTLB Error */
 	mfspr	r5,SPRN_DSISR
 	stw	r5,_DSISR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -417,6 +423,7 @@ DataStoreTLBMiss:
 	 * of the MMU.
 	 */
 2:	li	r11, 0x00f0
+	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
@@ -542,10 +549,14 @@ DataTLBError:
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
 
+	mfspr	r10, SPRN_DAR
+	cmpwi	cr0, r10, 0x00f0
+	beq-	2f	/* must be a buggy dcbX, icbi insn. */
+
 	/* First, make sure this was a store operation.
 	*/
-	mfspr	r10, SPRN_DSISR
-	andis.	r11, r10, 0x4000 /* no translation */
+	mfspr	r11, SPRN_DSISR
+	andis.	r11, r11, 0x4000 /* no translation */
 	bne	2f	/* branch if set */
 
 	/* The EA of a data TLB miss is automatically stored in the MD_EPN
@@ -564,7 +575,8 @@ DataTLBError:
 	 * are initialized in mapin_ram().  This will avoid the problem,
 	 * assuming we only use the dcbi instruction on kernel addresses.
 	 */
-	mfspr	r10, SPRN_DAR
+
+	/* DAR is in r10 already */
 	rlwinm	r11, r10, 0, 0, 19
 	ori	r11, r11, MD_EVALID
 	mfspr	r10, SPRN_M_CASID
@@ -620,6 +632,7 @@ DataTLBError:
 	 * of the MMU.
 	 */
 	li	r11, 0x00f0
+	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-- 
1.6.4.4