[PATCH] powerpc/5200: make BestComm gen_bd microcode exchangeable

Wolfram Sang w.sang at pengutronix.de
Sat Oct 3 19:44:17 EST 2009


Hi Albrecht,

you wrote your own microcode? :)
approach looks ok to me in general, but this patch is line-wrapped.

On Thu, Oct 01, 2009 at 09:55:38PM +0200, Albrecht Dreß wrote:
> This patch adds a method for defining different microcodes than the  
> pe-defined ones for the MPC52xx processor's BestComm General Buffer  

pre-defined

> Descriptor (gen_db) tasks.  The default microcode is still the one from  
> bcom_gen_bd_[rt]x_task, but it can be replaced by calling  
> bcom_gen_bd_set_microcode() which is more efficient than explicitly  
> loading it via bcom_load_image() after each bcom_gen_bd_[rt]x_reset().
>
> Signed-off-by: Albrecht Dreß <albrecht.dress at arcor.de>
>
>
> ---
>
>
> diff -uprN -X linux-2.6.30.3/Documentation/dontdiff  
> linux-2.6.30.3.orig/arch/powerpc/sysdev/bestcomm/gen_bd.c  
> linux-2.6.30.3/arch/powerpc/sysdev/bestcomm/gen_bd.c
> --- linux-2.6.30.3.orig/arch/powerpc/sysdev/bestcomm/gen_bd.c	2009-07-24 
> 23:47:51.000000000 +0200
> +++ linux-2.6.30.3/arch/powerpc/sysdev/bestcomm/gen_bd.c	2009-10-01 
> 14:26:33.000000000 +0200
> @@ -78,6 +78,7 @@ struct bcom_gen_bd_priv {
>  	int		initiator;
>  	int		ipr;
>  	int		maxbufsize;
> +	u32    *microcode;

spaces instead of tabs

>  };
>
>
> @@ -104,6 +105,7 @@ bcom_gen_bd_rx_init(int queue_len, phys_
>  	priv->initiator	= initiator;
>  	priv->ipr	= ipr;
>  	priv->maxbufsize = maxbufsize;
> +	priv->microcode = bcom_gen_bd_rx_task;
>
>  	if (bcom_gen_bd_rx_reset(tsk)) {
>  		bcom_task_free(tsk);
> @@ -128,7 +130,7 @@ bcom_gen_bd_rx_reset(struct bcom_task *t
>  	var = (struct bcom_gen_bd_rx_var *) bcom_task_var(tsk->tasknum);
>  	inc = (struct bcom_gen_bd_rx_inc *) bcom_task_inc(tsk->tasknum);
>
> -	if (bcom_load_image(tsk->tasknum, bcom_gen_bd_rx_task))
> +	if (bcom_load_image(tsk->tasknum, priv->microcode))
>  		return -1;
>
>  	var->enable	= bcom_eng->regs_base +
> @@ -188,6 +190,7 @@ bcom_gen_bd_tx_init(int queue_len, phys_
>  	priv->fifo	= fifo;
>  	priv->initiator	= initiator;
>  	priv->ipr	= ipr;
> +	priv->microcode = bcom_gen_bd_tx_task;
>
>  	if (bcom_gen_bd_tx_reset(tsk)) {
>  		bcom_task_free(tsk);
> @@ -212,7 +215,7 @@ bcom_gen_bd_tx_reset(struct bcom_task *t
>  	var = (struct bcom_gen_bd_tx_var *) bcom_task_var(tsk->tasknum);
>  	inc = (struct bcom_gen_bd_tx_inc *) bcom_task_inc(tsk->tasknum);
>
> -	if (bcom_load_image(tsk->tasknum, bcom_gen_bd_tx_task))
> +	if (bcom_load_image(tsk->tasknum, priv->microcode))
>  		return -1;
>
>  	var->enable	= bcom_eng->regs_base +
> @@ -253,6 +256,16 @@ bcom_gen_bd_tx_release(struct bcom_task
>  }
>  EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
>
> +void
> +bcom_gen_bd_set_microcode(struct bcom_task *tsk, u32 *microcode)
> +{
> +	struct bcom_gen_bd_priv *priv = tsk->priv;
> +
> +	priv->microcode = microcode;
> +}
> +EXPORT_SYMBOL_GPL(bcom_gen_bd_set_microcode);
> +
> +

Two empty lines.

>  /*  
> ---------------------------------------------------------------------
>   * PSC support code
>   */
> diff -uprN -X linux-2.6.30.3/Documentation/dontdiff  
> linux-2.6.30.3.orig/arch/powerpc/sysdev/bestcomm/gen_bd.h  
> linux-2.6.30.3/arch/powerpc/sysdev/bestcomm/gen_bd.h
> --- linux-2.6.30.3.orig/arch/powerpc/sysdev/bestcomm/gen_bd.h	2009-07-24 
> 23:47:51.000000000 +0200
> +++ linux-2.6.30.3/arch/powerpc/sysdev/bestcomm/gen_bd.h	2009-10-01 
> 14:26:50.000000000 +0200
> @@ -43,6 +43,9 @@ bcom_gen_bd_tx_reset(struct bcom_task *t
>  extern void
>  bcom_gen_bd_tx_release(struct bcom_task *tsk);
>
> +extern void
> +bcom_gen_bd_set_microcode(struct bcom_task *tsk, u32 *microcode);
> +
>
>  /* PSC support utility wrappers */
>  struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int  
> queue_len,
>

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20091003/d90fb5f5/attachment.pgp>


More information about the Linuxppc-dev mailing list