spi_mpc8xxx.c: chip select polarity problem
Torsten Fleischer
to-fleischer at t-online.de
Sun Nov 22 03:08:47 EST 2009
On Sat, Nov 21, 2009 at 09:45:50 Grant Likely wrote:
[...]
> Hey Torsten, do you have an updated version of this change to address
> the comments? I'm collecting the last few things for some linux-next
> exposure now.
Hey Grant,
here is the updated version of the patch containing the recommended
changes.
Best Regards
Torsten
Signed-off-by: Torsten Fleischer <to-fleischer at t-online.de>
---
diff -u -r -N linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c linux-2.6.31.6/drivers/spi/spi_mpc8xxx.c
--- linux-2.6.31.6_orig//drivers/spi/spi_mpc8xxx.c 2009-11-10 01:32:31.000000000 +0100
+++ linux-2.6.31.6/drivers/spi/spi_mpc8xxx.c 2009-11-19 08:15:33.000000000 +0100
@@ -114,6 +114,7 @@
u32 rx_shift; /* RX data reg shift when in qe mode */
u32 tx_shift; /* TX data reg shift when in qe mode */
u32 hw_mode; /* Holds HW mode register settings */
+ int initialized;
};
static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val)
@@ -503,15 +504,52 @@
return ret;
}
+
+
+struct mpc8xxx_spi_probe_info {
+ struct fsl_spi_platform_data pdata;
+ int *gpios;
+ bool *alow_flags;
+};
+
+static struct mpc8xxx_spi_probe_info *
+to_of_pinfo(struct fsl_spi_platform_data *pdata)
+{
+ return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata);
+}
+
+static int mpc8xxx_spi_cs_init(struct spi_device *spi)
+{
+ struct device *dev = spi->dev.parent;
+ struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
+ u16 cs = spi->chip_select;
+ int gpio = pinfo->gpios[cs];
+ bool on = pinfo->alow_flags[cs] ^ !(spi->mode & SPI_CS_HIGH);
+
+ return gpio_direction_output(gpio, on);
+}
+
static int mpc8xxx_spi_transfer(struct spi_device *spi,
struct spi_message *m)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
+ struct spi_mpc8xxx_cs *cs = spi->controller_state;
unsigned long flags;
m->actual_length = 0;
m->status = -EINPROGRESS;
+ if (cs && !cs->initialized) {
+ int ret;
+
+ ret = mpc8xxx_spi_cs_init(spi);
+ if (ret) {
+ dev_dbg(&spi->dev, "cs_init failed: %d\n", ret);
+ return ret;
+ }
+ cs->initialized = 1;
+ }
+
spin_lock_irqsave(&mpc8xxx_spi->lock, flags);
list_add_tail(&m->queue, &mpc8xxx_spi->queue);
queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work);
@@ -648,18 +686,6 @@
return 0;
}
-struct mpc8xxx_spi_probe_info {
- struct fsl_spi_platform_data pdata;
- int *gpios;
- bool *alow_flags;
-};
-
-static struct mpc8xxx_spi_probe_info *
-to_of_pinfo(struct fsl_spi_platform_data *pdata)
-{
- return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata);
-}
-
static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on)
{
struct device *dev = spi->dev.parent;
@@ -720,14 +746,6 @@
pinfo->gpios[i] = gpio;
pinfo->alow_flags[i] = flags & OF_GPIO_ACTIVE_LOW;
-
- ret = gpio_direction_output(pinfo->gpios[i],
- pinfo->alow_flags[i]);
- if (ret) {
- dev_err(dev, "can't set output direction for gpio "
- "#%d: %d\n", i, ret);
- goto err_loop;
- }
}
pdata->max_chipselect = ngpios;
More information about the Linuxppc-dev
mailing list