[PATCH 1/2] pmac-zilog: add platform driver
Finn Thain
fthain at telegraphics.com.au
Tue Nov 17 20:04:44 EST 2009
Add platform driver to the pmac-zilog driver for mac 68k, putting the
powermac-specific bits inside #ifdef CONFIG_PPC_PMAC.
This patch should be applied after "[PATCH 3/13] pmac-zilog: cleanup". It
renders obsolete the version in "[PATCH 4/13] pmac-zilog, mac68k: replace
mac68k SCC code with platform".
Signed-off-by: Finn Thain <fthain at telegraphics.com.au>
---
arch/m68k/configs/mac_defconfig | 5 +
arch/m68k/configs/multi_defconfig | 5 +
drivers/serial/Kconfig | 12 +-
drivers/serial/pmac_zilog.c | 159 +++++++++++++++++++++++++++++++++-----
drivers/serial/pmac_zilog.h | 14 +++
5 files changed, 169 insertions(+), 26 deletions(-)
Index: linux-2.6.31/drivers/serial/Kconfig
===================================================================
--- linux-2.6.31.orig/drivers/serial/Kconfig 2009-11-17 17:05:27.000000000 +1100
+++ linux-2.6.31/drivers/serial/Kconfig 2009-11-17 17:07:38.000000000 +1100
@@ -1079,12 +1079,12 @@ config SERIAL_68360
default y
config SERIAL_PMACZILOG
- tristate "PowerMac z85c30 ESCC support"
- depends on PPC_OF && PPC_PMAC
+ tristate "Mac or PowerMac z85c30 ESCC support"
+ depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
select SERIAL_CORE
help
This driver supports the Zilog z85C30 serial ports found on
- PowerMac machines.
+ (Power)Mac machines.
Say Y or M if you want to be able to these serial ports.
config SERIAL_PMACZILOG_TTYS
@@ -1109,16 +1109,16 @@ config SERIAL_PMACZILOG_TTYS
unable to use the 8250 module for PCMCIA or other 16C550-style
UARTs.
- Say N unless you need the z85c30 ports on your powermac
+ Say N unless you need the z85c30 ports on your (Power)Mac
to appear as /dev/ttySn.
config SERIAL_PMACZILOG_CONSOLE
- bool "Console on PowerMac z85c30 serial port"
+ bool "Console on Mac or PowerMac z85c30 serial port"
depends on SERIAL_PMACZILOG=y
select SERIAL_CORE_CONSOLE
help
If you would like to be able to use the z85c30 serial port
- on your PowerMac as the console, you can do so by answering
+ on your (Power)Mac as the console, you can do so by answering
Y to this option.
config SERIAL_LH7A40X
Index: linux-2.6.31/arch/m68k/configs/mac_defconfig
===================================================================
--- linux-2.6.31.orig/arch/m68k/configs/mac_defconfig 2009-11-17 17:07:29.000000000 +1100
+++ linux-2.6.31/arch/m68k/configs/mac_defconfig 2009-11-17 17:07:38.000000000 +1100
@@ -701,6 +701,11 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
Index: linux-2.6.31/arch/m68k/configs/multi_defconfig
===================================================================
--- linux-2.6.31.orig/arch/m68k/configs/multi_defconfig 2009-11-17 17:07:29.000000000 +1100
+++ linux-2.6.31/arch/m68k/configs/multi_defconfig 2009-11-17 17:07:38.000000000 +1100
@@ -822,6 +822,11 @@ CONFIG_A2232=y
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
Index: linux-2.6.31/drivers/serial/pmac_zilog.c
===================================================================
--- linux-2.6.31.orig/drivers/serial/pmac_zilog.c 2009-11-17 17:07:28.000000000 +1100
+++ linux-2.6.31/drivers/serial/pmac_zilog.c 2009-11-17 17:07:38.000000000 +1100
@@ -63,11 +63,18 @@
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
#include <asm/macio.h>
+#else
+#include <linux/platform_device.h>
+#include <asm/macints.h>
+#define machine_is_compatible(x) (0)
+#endif
#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -83,11 +90,9 @@
static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh at kernel.crashing.org>)";
MODULE_AUTHOR("Benjamin Herrenschmidt <benh at kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
MODULE_LICENSE("GPL");
-#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
-
#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
#define PMACZILOG_MAJOR TTY_MAJOR
#define PMACZILOG_MINOR 64
@@ -341,7 +346,7 @@ static struct tty_struct *pmz_receive_ch
uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
write_zsreg(uap, R1, uap->curregs[R1]);
zssync(uap);
- dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+ pmz_error("pmz: rx irq flood !\n");
return tty;
}
@@ -746,6 +751,8 @@ static void pmz_break_ctl(struct uart_po
spin_unlock_irqrestore(&port->lock, flags);
}
+#ifdef CONFIG_PPC_PMAC
+
/*
* Turn power on or off to the SCC and associated stuff
* (port drivers, modem, IR port, etc.)
@@ -781,6 +788,15 @@ static int pmz_set_scc_power(struct uart
return delay;
}
+#else
+
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
/*
* FixZeroBug....Works around a bug in the SCC receving channel.
* Inspired from Darwin code, 15 Sept. 2000 -DanM
@@ -943,9 +959,9 @@ static int pmz_startup(struct uart_port
}
pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
- dev_err(&uap->dev->ofdev.dev,
- "Unable to register zs interrupt handler.\n");
+ if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
+ "SCC", uap)) {
+ pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
@@ -1185,7 +1201,7 @@ static void pmz_irda_setup(struct uart_p
while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
|| (read_zsreg(uap, R1) & ALL_SNT) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+ pmz_error("transmitter didn't drain\n");
return;
}
udelay(10);
@@ -1201,7 +1217,7 @@ static void pmz_irda_setup(struct uart_p
read_zsdata(uap);
mdelay(10);
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+ pmz_error("receiver didn't drain\n");
return;
}
}
@@ -1222,8 +1238,7 @@ static void pmz_irda_setup(struct uart_p
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on get_version byte\n");
+ pmz_error("irda_setup timed out on get_version byte\n");
goto out;
}
udelay(10);
@@ -1231,8 +1246,7 @@ static void pmz_irda_setup(struct uart_p
version = read_zsdata(uap);
if (version < 4) {
- dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
- version);
+ pmz_info("IrDA: dongle version %d not supported\n", version);
goto out;
}
@@ -1241,19 +1255,17 @@ static void pmz_irda_setup(struct uart_p
t = 5000;
while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
if (--t <= 0) {
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup timed out on speed mode byte\n");
+ pmz_error("irda_setup timed out on speed mode byte\n");
goto out;
}
udelay(10);
}
t = read_zsdata(uap);
if (t != cmdbyte)
- dev_err(&uap->dev->ofdev.dev,
- "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+ pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
- dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
- *baud, version);
+ pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
+ *baud, version);
(void)read_zsdata(uap);
(void)read_zsdata(uap);
@@ -1402,7 +1414,7 @@ static void pmz_poll_put_char(struct uar
write_zsdata(uap, c);
}
-#endif
+#endif /* CONFIG_CONSOLE_POLL */
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
@@ -1427,6 +1439,8 @@ static struct uart_ops pmz_pops = {
#endif
};
+#ifdef CONFIG_PPC_PMAC
+
/*
* Setup one port structure after probing, HW is down at this point,
* Unlike sunzilog, we don't need to pre-init the spinlock as we don't
@@ -1823,6 +1837,88 @@ next:
return 0;
}
+#else
+
+extern struct platform_device scc_a_pdev, scc_b_pdev;
+
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+ struct resource *r_ports;
+ int irq;
+
+ r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->node, 0);
+ if (!r_ports || !irq)
+ return -ENODEV;
+
+ uap->port.mapbase = r_ports->start;
+ uap->port.membase = (unsigned char __iomem *) r_ports->start;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = irq;
+ uap->port.uartclk = ZS_CLOCK;
+ uap->port.fifosize = 1;
+ uap->port.ops = &pmz_pops;
+ uap->port.type = PORT_PMAC_ZILOG;
+ uap->port.flags = 0;
+
+ uap->control_reg = uap->port.membase;
+ uap->data_reg = uap->control_reg + 4;
+ uap->port_type = 0;
+
+ pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+ return 0;
+}
+
+static int __init pmz_probe(void)
+{
+ int err;
+
+ pmz_ports_count = 0;
+
+ pmz_ports[0].mate = &pmz_ports[1];
+ pmz_ports[0].port.line = 0;
+ pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
+ pmz_ports[0].node = &scc_a_pdev;
+ err = pmz_init_port(&pmz_ports[0]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ pmz_ports[1].mate = &pmz_ports[0];
+ pmz_ports[1].port.line = 1;
+ pmz_ports[1].flags = 0;
+ pmz_ports[1].node = &scc_b_pdev;
+ err = pmz_init_port(&pmz_ports[1]);
+ if (err)
+ return err;
+ pmz_ports_count++;
+
+ return 0;
+}
+
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+ memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+static int pmz_attach(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < pmz_ports_count; i++)
+ if (pmz_ports[i].node == pdev)
+ return 0;
+ return -ENODEV;
+}
+
+static int pmz_detach(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
static void pmz_console_write(struct console *con, const char *s, unsigned int count);
@@ -1883,6 +1979,8 @@ err_out:
return rc;
}
+#ifdef CONFIG_PPC_PMAC
+
static struct of_device_id pmz_match[] =
{
{
@@ -1904,6 +2002,19 @@ static struct macio_driver pmz_driver =
.resume = pmz_resume,
};
+#else
+
+static struct platform_driver pmz_driver = {
+ .probe = pmz_attach,
+ .remove = __devexit_p(pmz_detach),
+ .driver = {
+ .name = "scc",
+ .owner = THIS_MODULE,
+ },
+};
+
+#endif /* !CONFIG_PPC_PMAC */
+
static int __init init_pmz(void)
{
int rc, i;
@@ -1942,15 +2053,23 @@ static int __init init_pmz(void)
/*
* Then we register the macio driver itself
*/
+#ifdef CONFIG_PPC_PMAC
return macio_register_driver(&pmz_driver);
+#else
+ return platform_driver_register(&pmz_driver);
+#endif
}
static void __exit exit_pmz(void)
{
int i;
+#ifdef CONFIG_PPC_PMAC
/* Get rid of macio-driver (detach from macio) */
macio_unregister_driver(&pmz_driver);
+#else
+ platform_driver_unregister(&pmz_driver);
+#endif
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
Index: linux-2.6.31/drivers/serial/pmac_zilog.h
===================================================================
--- linux-2.6.31.orig/drivers/serial/pmac_zilog.h 2009-11-17 17:07:28.000000000 +1100
+++ linux-2.6.31/drivers/serial/pmac_zilog.h 2009-11-17 17:07:38.000000000 +1100
@@ -1,7 +1,15 @@
#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__
+#ifdef CONFIG_PPC_PMAC
#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
+#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
+#else
+#define pmz_debug(fmt, arg...) do { } while (0)
+#define pmz_error(fmt, arg...) printk(KERN_ERR fmt, ## arg)
+#define pmz_info(fmt, arg...) printk(KERN_INFO fmt, ## arg)
+#endif
/*
* At most 2 ESCCs with 2 ports each
@@ -17,6 +25,7 @@ struct uart_pmac_port {
struct uart_port port;
struct uart_pmac_port *mate;
+#ifdef CONFIG_PPC_PMAC
/* macio_dev for the escc holding this port (maybe be null on
* early inited port)
*/
@@ -25,6 +34,9 @@ struct uart_pmac_port {
* of "escc" node (ie. ch-a or ch-b)
*/
struct device_node *node;
+#else
+ struct platform_device *node;
+#endif
/* Port type as obtained from device tree (IRDA, modem, ...) */
int port_type;
@@ -55,10 +67,12 @@ struct uart_pmac_port {
volatile u8 __iomem *control_reg;
volatile u8 __iomem *data_reg;
+#ifdef CONFIG_PPC_PMAC
unsigned int tx_dma_irq;
unsigned int rx_dma_irq;
volatile struct dbdma_regs __iomem *tx_dma_regs;
volatile struct dbdma_regs __iomem *rx_dma_regs;
+#endif
struct ktermios termios_cache;
};
More information about the Linuxppc-dev
mailing list