[PATCH][v2] powerpc/85xx: Create dts for each core in CAMP mode for P2020RDB

Kumar Gala galak at kernel.crashing.org
Fri Nov 6 00:15:34 EST 2009


On Sep 19, 2009, at 12:13 PM, Poonam Aggrwal wrote:

> This patch creates the dts files for each core and splits the  
> devices between
> the two cores for P2020RDB.
>
> core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto,  
> global-util, pci0
> core1 has L2, dma2, eth0, pci1, msi.
>
> MPIC is shared between two cores but each core will protect its
> interrupts from other core by using "protected-sources" of mpic.
>
> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
> ---
> - based on http://www.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
> - branch->next
> - Removed interrupt properties for serial ports to make them work in  
> polling mode.
> arch/powerpc/boot/dts/p2020rdb_camp_core0.dts |  363 ++++++++++++++++ 
> +++++++++
> arch/powerpc/boot/dts/p2020rdb_camp_core1.dts |  184 +++++++++++++
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c     |   10 +-
> 3 files changed, 556 insertions(+), 1 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
> create mode 100644 arch/powerpc/boot/dts/p2020rdb_camp_core1.dts

applied to next.

- k


More information about the Linuxppc-dev mailing list