[PATCH V3 4/4] Fabric bindings for STAC9766 on the Efika

[Jon Smirl]

On Thu, May 28, 2009 at 10:00 AM, Peter Korsgaard <jacmet at sunsite.dk> wrote:
>>>>>> "Jon" == Jon Smirl <jonsmirl at gmail.com> writes:
>
> Hi,
>
>  Jon> Fabric bindings for STAC9766 AC97 codec on the Efika.
>  Jon> Signed-off-by: Jon Smirl <jonsmirl at gmail.com>
>  Jon> ---
>  Jon>  sound/soc/fsl/Kconfig              |    8 +++
>  Jon>  sound/soc/fsl/Makefile             |    1
>  Jon>  sound/soc/fsl/efika-audio-fabric.c |   95 ++++++++++++++++++++++++++++++++++++
>  Jon>  3 files changed, 104 insertions(+), 0 deletions(-)
>  Jon>  create mode 100644 sound/soc/fsl/efika-audio-fabric.c
>
>  Jon> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
>  Jon> index 79579ae..f571c6e 100644
>  Jon> --- a/sound/soc/fsl/Kconfig
>  Jon> +++ b/sound/soc/fsl/Kconfig
>  Jon> @@ -47,3 +47,11 @@ config SND_MPC52xx_SOC_PCM030
>  Jon>   help
>  Jon>     Say Y if you want to add support for sound on the Phytec pcm030 baseboard.
>
>  Jon> +config SND_MPC52xx_SOC_EFIKA
>  Jon> + tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
>  Jon> + depends on PPC_EFIKA
>  Jon> + select SND_SOC_MPC5200_AC97
>  Jon> + select SND_SOC_STAC9766
>  Jon> + help
>  Jon> +   Say Y if you want to add support for sound on the Efika.
>  Jon> +
>
> Wouldn't it make more sense to make this default y when it has such
> specific dependencies and is so deep down in the tree - Most efika
> users probably want to enable this if they have enabled ALSA and
> SND_SOC?

I can change it in the next round of updates. Right now I'd like to
get some people testing it and maybe doing some patches to enhance it.

For example I know he code has a problem where about 5% of the time
the codec doesn't reset right on boot. Someone needs to put an
oscilloscope on the codec chip and tell me why it is failing.

>
> --
> Bye, Peter Korsgaard
>



-- 
Jon Smirl
jonsmirl at gmail.com