Add a node for the i2c eeprom and delete the superflous gpio-example.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Cc: Grant Likely <grant.likely at secretlab.ca>
Cc: linuxppc-dev at ozlabs.org
---
arch/powerpc/boot/dts/pcm030.dts | 26 ++++----------------------
1 files changed, 4 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8958347..33ce488 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -258,34 +258,16 @@
compatible = "nxp,pcf8563";
reg = <0x51>;
};
- /* FIXME: EEPROM */
+ eeprom at 52 {
+ compatible = "at24,24c32";
+ reg = <0x52>;
+ };
};
sram at 8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
-
- /* This is only an example device to show the usage of gpios. It maps all available
- * gpios to the "gpio-provider" device.
- */
- gpio {
- compatible = "gpio-provider";
-
- /* mpc52xx exp.con patchfield */
- gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */
- &gpio_wkup 1 0 /* GPIO_WKUP_6 14c */
- &gpio_wkup 6 0 /* PSC2_4 43c x5-11 */
- &gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */
- &gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */
- &gpt2 0 0 /* timer2 12d x4-4 */
- &gpt3 0 0 /* timer3 13d x6-4 */
- &gpt4 0 0 /* timer4 61c x2-16 */
- &gpt5 0 0 /* timer5 44c x7-11 */
- &gpt6 0 0 /* timer6 60c x8-15 */
- &gpt7 0 0 /* timer7 36a x17-9 */
- >;
- };
};
pci at f0000d00 {
--
1.6.2