Patch 1/2: Add support for Xilinx PLB PCI soft-core [attempt2]

[Grant Likely]

Roderick,

These two patches are missing a "signed-off-by" line from you.  Can
you please reply with one confirming that the patches adhere to the
Developer's Certificate of Origin from
Documentation/SubmittingPatches?

Thanks,
g.

On Wed, Apr 15, 2009 at 2:40 AM, Roderick Colenbrander
<thunderbird2k at gmail.com> wrote:
> Hi,
>
> This is an updated version of the patch which takes into account a few changes suggested by Grant which I forgot to add.
>
> Regards,
> Roderick Colenbrander
>
> >From 2b34a315b18834448c0a8218d4da85ffaf76039e Mon Sep 17 00:00:00 2001
> From: Roderick Colenbrander <thunderbird2k at gmail.com>
> Date: Tue, 14 Apr 2009 15:45:07 +0200
> Subject: [PATCH] Add support for the Xilinx PLB PCI soft-core which is used on Xilinx ML410 and ML510 FPGA boards.
>
> ---
>  arch/powerpc/sysdev/Kconfig      |    4 ++
>  arch/powerpc/sysdev/Makefile     |    1 +
>  arch/powerpc/sysdev/virtex_pci.c |   99 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 104 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/sysdev/virtex_pci.c
>
> diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
> index 3965828..2d0be14 100644
> --- a/arch/powerpc/sysdev/Kconfig
> +++ b/arch/powerpc/sysdev/Kconfig
> @@ -12,3 +12,7 @@ config PPC_MSI_BITMAP
>        depends on PCI_MSI
>        default y if MPIC
>        default y if FSL_PCI
> +
> +config XILINX_VIRTEX_PCI
> +       bool
> +       depends on PCI
> diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
> index b33b28a..b93794e 100644
> --- a/arch/powerpc/sysdev/Makefile
> +++ b/arch/powerpc/sysdev/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_IPIC)            += ipic.o
>  obj-$(CONFIG_4xx)              += uic.o
>  obj-$(CONFIG_4xx_SOC)          += ppc4xx_soc.o
>  obj-$(CONFIG_XILINX_VIRTEX)    += xilinx_intc.o
> +obj-$(CONFIG_XILINX_VIRTEX_PCI)        += virtex_pci.o
>  obj-$(CONFIG_OF_RTC)           += of_rtc.o
>  ifeq ($(CONFIG_PCI),y)
>  obj-$(CONFIG_4xx)              += ppc4xx_pci.o
> diff --git a/arch/powerpc/sysdev/virtex_pci.c b/arch/powerpc/sysdev/virtex_pci.c
> new file mode 100644
> index 0000000..b5137b5
> --- /dev/null
> +++ b/arch/powerpc/sysdev/virtex_pci.c
> @@ -0,0 +1,99 @@
> +/*
> + * PCI support for Xilinx plbv46_pci soft-core which can be used on
> + * Xilinx Virtex ML410 / ML510 boards.
> + *
> + * Copyright 2009 Roderick Colenbrander
> + *
> + * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
> + * by Benjamin Herrenschmidt.
> + * Copyright 2007 Ben. Herrenschmidt <benh at kernel.crashing.org>, IBM Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <linux/pci.h>
> +#include <mm/mmu_decl.h>
> +#include <asm/io.h>
> +
> +#define XPLB_PCI_ADDR 0x10c
> +#define XPLB_PCI_DATA 0x110
> +#define XPLB_PCI_BUS  0x114
> +
> +#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
> +
> +static void fixup_virtex_pci_bridge(struct pci_dev *dev)
> +{
> +       struct pci_controller *hose;
> +       int i;
> +
> +       if (dev->devfn || dev->bus->self)
> +               return;
> +
> +       hose = pci_bus_to_host(dev->bus);
> +       if (!hose)
> +               return;
> +
> +       if(!of_device_is_compatible(hose->dn, "xlnx,plbv46-pci-1.03.a"))
> +               return;
> +
> +       /* Hide the PCI host BARs from the kernel as their content doesn't
> +        * fit well in the resource management
> +        */
> +       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
> +       {
> +               dev->resource[i].start = 0;
> +               dev->resource[i].end = 0;
> +               dev->resource[i].flags = 0;
> +       }
> +
> +       dev_info(&dev->dev, "PCI: Hiding Xilinx plb-pci host bridge resources %s\n", pci_name(dev));
> +}
> +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_virtex_pci_bridge);
> +
> +void virtex_pci_init(void)
> +{
> +       struct pci_controller *hose;
> +       struct resource r;
> +       void __iomem *pci_reg;
> +       struct device_node *pci_node = of_find_compatible_node(NULL, NULL, "xlnx,plbv46-pci-1.03.a");
> +
> +       if(!pci_node)
> +               return;
> +
> +       printk("Found a Xilinx plb-pci host bridge\n");
> +
> +       if(of_address_to_resource(pci_node, 0, &r))
> +       {
> +               printk("No address for Xilinx plb-pci host bridge\n");
> +               return;
> +       }
> +
> +       hose = pcibios_alloc_controller(pci_node);
> +       if (!hose)
> +               return;
> +
> +       hose->first_busno = 0;
> +       hose->last_busno = 0;
> +
> +       /* Setup config space */
> +       setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR, r.start + XPLB_PCI_DATA, PPC_INDIRECT_TYPE_SET_CFG_TYPE);
> +
> +       /* According to the xilinx plbv46_pci documentation the soft-core starts
> +        * a self-init when the bus master enable bit is set. Without this bit
> +        * set the pci bus can't be scanned.
> +        */
> +       early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
> +
> +       /* Set the max latency timer to 255 */
> +       early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
> +
> +       /* Set the max bus number to 255 */
> +       pci_reg = of_iomap(pci_node, 0);
> +       out_8(pci_reg + XPLB_PCI_BUS, 0xff);
> +       iounmap(pci_reg);
> +
> +       /* Register the host bridge with the linux kernel! */
> +       pci_process_bridge_OF_ranges(hose, pci_node, 1);
> +}
> --
> 1.5.6.3
>
>
>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.