[PATCH] net/fs_enet/mii-fec: Use PHY_POLL instead of hard coded '-1'

[Grant Likely]

On Fri, May 8, 2009 at 8:00 AM, Wolfram Sang <w.sang at pengutronix.de> wrote:
> Initialize the irq-table with PHY_POLL. '-1' means the same now, but is
> hardly maintainable.
>
> Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
> Cc: Vitaly Bordug <vbordug at ru.mvista.com>
> Cc: Pantelis Antoniou <pantelis.antoniou at gmail.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>
> Cc: netdev at vger.kernel.org
> Cc: linuxppc-dev at ozlabs.org
> ---
>  drivers/net/fs_enet/mii-fec.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
> index 28077cc..9eb5480 100644
> --- a/drivers/net/fs_enet/mii-fec.c
> +++ b/drivers/net/fs_enet/mii-fec.c
> @@ -166,7 +166,7 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
>                goto out_unmap_regs;
>
>        for (i = 0; i < PHY_MAX_ADDR; i++)
> -               new_bus->irq[i] = -1;
> +               new_bus->irq[i] = PHY_POLL;

This code no longer exists in net-next.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.