[PATCH 6/6] powerpc/85xx: Add STMicro M25P40 serial flash support for MPC8569E-MDS

[Kumar Gala]

On May 1, 2009, at 9:16 PM, Anton Vorontsov wrote:

> For serial flash support we need to:
>
> - Add QE Par IO Bank E device tree node, a GPIO from this bank is
>  used for SPI chip-select line;
> - Add serial-flash node;
> - Add proper module alias into of/base.c.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8569mds.dts |   26 +++++++++++++++++++++++---
> drivers/of/base.c                    |    1 +
> 2 files changed, 24 insertions(+), 3 deletions(-)

applied to next

- k