Unable to boot 2.6.29 (and tot kernel) with 256k page size on katmai.

[Wolfgang Denk]

Dear Shubhada,

In message <8A71B368A89016469F72CD08050AD33402D575FA at maui.asicdesigners.com> you wrote:
> 
> I am unable to boot the 2.6.29-rc8 denx kernel (and 2.6.30-rc4 tot
> kernel) when I enable the 256k page size. My config file is attached.
> The *same* config works fine with 64k page size. I have 2GB memory on
> this board. 

Which root file system are you using?

> ## Booting image at 01000000 ...
>    Image Name:   Linux-2.6.29-rc8-01447-g3bf8ce5-
>    Created:      2009-05-05   0:31:36 UTC
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    2138773 Bytes =  2 MB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
>    Booting using the fdt at 0x4000000
>    Loading Device Tree to 007fb000, end 007fefff ... OK

Is this all you get? Nothing else?


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Nobody will ever need more than 640k RAM!"       -- Bill Gates, 1981
"Windows 95 needs at least 8 MB RAM."             -- Bill Gates, 1996
"Nobody will ever need Windows 95."             -- logical conclusion