[PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD

[Andrew Morton]

On Fri, 1 May 2009 03:47:39 +0400
Anton Vorontsov <avorontsov at ru.mvista.com> wrote:

> Here are few patches that are needed to support spi-mmc slot on
> MPC8610HPCD PowerPC boards:
> 
> [1/9] spi_mpc83xx: Handles other Freescale processors
> [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message
> [3/9] spi_mpc83xx: Add small delay after asserting chip-select line
> [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards
> 

Some or all of these seem appropriate to 2.6.30 and perhaps even -stable?