[PATCH 4/9] openfirmware: Add OF phylib support code

Grant Likely grant.likely at secretlab.ca
Thu Mar 19 16:06:17 EST 2009


RFC, please don't apply yet.

On Wed, Mar 18, 2009 at 11:00 PM, Grant Likely
<grant.likely at secretlab.ca> wrote:
> From: Grant Likely <grant.likely at secretlab.ca>
>
> Add support for parsing the device tree for PHY devices on an MDIO bus
>
> CC: Andy Fleming <afleming at freescale.com>
> CC: linuxppc-dev at ozlabs.org
> CC: devtree-discuss at ozlabs.org
>
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
> ---
>
>  drivers/of/Kconfig      |    6 ++
>  drivers/of/Makefile     |    1
>  drivers/of/of_mdio.c    |  130 +++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/of_mdio.h |   21 ++++++++
>  4 files changed, 158 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/of/of_mdio.c
>  create mode 100644 include/linux/of_mdio.h
>
>
> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
> index f821dbc..6fe043b 100644
> --- a/drivers/of/Kconfig
> +++ b/drivers/of/Kconfig
> @@ -19,3 +19,9 @@ config OF_SPI
>        depends on OF && PPC_OF && SPI
>        help
>          OpenFirmware SPI accessors
> +
> +config OF_MDIO
> +       def_tristate PHYLIB
> +       depends on OF && PHYLIB
> +       help
> +         OpenFirmware MDIO bus (Ethernet PHY) accessors
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index 4c3c6f8..bdfb5f5 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_OF_DEVICE) += device.o platform.o
>  obj-$(CONFIG_OF_GPIO)   += gpio.o
>  obj-$(CONFIG_OF_I2C)   += of_i2c.o
>  obj-$(CONFIG_OF_SPI)   += of_spi.o
> +obj-$(CONFIG_OF_MDIO)  += of_mdio.o
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> new file mode 100644
> index 0000000..6f3038a
> --- /dev/null
> +++ b/drivers/of/of_mdio.c
> @@ -0,0 +1,130 @@
> +/*
> + * OF helpers for the MDIO (Ethernet PHY) API
> + *
> + * Copyright (c) 2009 Secret Lab Technologies, Ltd.
> + *
> + * This file is released under the GPLv2
> + *
> + * This file provides helper functions for extracting PHY device information
> + * out of the OpenFirmware device tree and using it to populate an mii_bus.
> + */
> +
> +#include <linux/phy.h>
> +#include <linux/of.h>
> +#include <linux/of_mdio.h>
> +#include <linux/module.h>
> +
> +MODULE_AUTHOR("Grant Likely <grant.likely at secretlab.ca>");
> +MODULE_LICENSE("GPL");
> +
> +/**
> + * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
> + * @mdio: pointer to mii_bus structure
> + * @np: pointer to device_node of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @np.
> + */
> +int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
> +{
> +       struct phy_device *phy;
> +       struct device_node *child;
> +       int rc, i;
> +
> +       /* Mask out all PHYs from auto probing.  Instead the PHYs listed in
> +        * the device tree are populated after the bus has been registered */
> +       mdio->phy_mask = ~0;
> +
> +       /* Clear all the IRQ properties */
> +       if (mdio->irq)
> +               for (i=0; i<PHY_MAX_ADDR; i++)
> +                       mdio->irq[i] = PHY_POLL;
> +
> +       /* Register the MDIO bus */
> +       rc = mdiobus_register(mdio);
> +       if (rc)
> +               return rc;
> +
> +       /* Loop over the child nodes and register a phy_device for each one */
> +       for_each_child_of_node(np, child) {
> +               const u32 *addr;
> +               int len;
> +
> +               /* A PHY must have a reg property in the range [0-31] */
> +               addr = of_get_property(child, "reg", &len);
> +               if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) {
> +                       dev_err(&mdio->dev, "%s has invalid PHY address\n",
> +                               child->full_name);
> +                       continue;
> +               }
> +
> +               if (mdio->irq) {
> +                       mdio->irq[*addr] = irq_of_parse_and_map(child, 0);
> +                       if (!mdio->irq[*addr])
> +                               mdio->irq[*addr] = PHY_POLL;
> +               }
> +
> +               phy = get_phy_device(mdio, *addr);
> +               if (!phy) {
> +                       dev_err(&mdio->dev, "error probing PHY at address %i\n",
> +                               *addr);
> +                       continue;
> +               }
> +               phy_scan_fixups(phy);
> +
> +               /* Associate the OF node with the device structure so it
> +                * can be looked up later */
> +               of_node_get(child);
> +               dev_archdata_set_node(&phy->dev.archdata, child);
> +
> +               /* All data is now stored in the phy struct; register it */
> +               rc = phy_device_register(phy);
> +               if (rc) {
> +                       phy_device_free(phy);
> +                       of_node_put(child);
> +                       continue;
> +               }
> +
> +               dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
> +                       child->name, *addr);
> +       }
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(of_mdiobus_register);
> +
> +/**
> + * of_phy_connect - Connect to the phy described in the device tree
> + * @dev: pointer to net_device claiming the phy
> + * @phy_np: Pointer to device tree node for the PHY
> + * @hndlr: Link state callback for the network device
> + * @iface: PHY data interface type
> + *
> + * Returns a pointer to the phy_device if successfull.  NULL otherwise
> + */
> +struct phy_device *of_phy_connect(struct net_device *dev,
> +                                 struct device_node *phy_np,
> +                                 void (*hndlr)(struct net_device *), u32 flags,
> +                                 phy_interface_t iface)
> +{
> +       int match(struct device *dev, void *phy_np)
> +       {
> +               return dev_archdata_get_node(&dev->archdata) == phy_np;
> +       }
> +       struct device *d;
> +       int rc;
> +
> +       if (!phy_np)
> +               return NULL;
> +
> +       d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
> +       if (!d)
> +               return NULL;
> +
> +       rc = phy_connect_direct(dev, to_phy_device(d), hndlr, flags, iface);
> +       if (rc)
> +               return NULL;
> +
> +       return to_phy_device(d);
> +}
> +EXPORT_SYMBOL(of_phy_connect);
> diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
> new file mode 100644
> index 0000000..ec092cc
> --- /dev/null
> +++ b/include/linux/of_mdio.h
> @@ -0,0 +1,21 @@
> +/*
> + * OF helpers for the MDIO (Ethernet PHY) API
> + *
> + * Copyright (c) 2009 Secret Lab Technologies, Ltd.
> + *
> + * This file is released under the GPLv2
> + */
> +
> +#ifndef __LINUX_OF_MDIO_H
> +#define __LINUX_OF_MDIO_H
> +
> +#include <linux/phy.h>
> +#include <linux/of.h>
> +
> +extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
> +extern struct phy_device *of_phy_connect(struct net_device *dev,
> +                                        struct device_node *phy_np,
> +                                        void (*hndlr)(struct net_device *),
> +                                        u32 flags, phy_interface_t iface);
> +
> +#endif /* __LINUX_OF_MDIO_H */
>
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.



More information about the Linuxppc-dev mailing list