Problem with radeonfb on PowerPC 7448&MV64560
Eduard Fuchs
edfuchs at uni-kassel.de
Wed Mar 18 02:30:25 EST 2009
Hi all,
since several days I'm trying to run an ATI 9250 (PCI) graphic card under
Linux Kernel 2.6.27.19. Nevertheless without success. The kernel shows the
following message:
videoboot: Booting PCI video card bus 0, function 0, device 7
biosEmu: undefined interrupt 15h called!
biosEmu/bios.int42: unknown function AH=0x0, AL=0x7, BL=0x0
radeonfb (0000:00:07.0): Cannot match card to OF node !
RADEON: CHIP_FAMILY 10 (0xa)
RADEON: MMIO_BASE 0xf1058000
RADEON: MMIO_BASE_PHYS 0x88000000
radeonfb (0000:00:07.0): Found 0k of SDRAM 64 bits wide videoram
RADEON: Try map FB Phys 0x80000000, size 0, 16777216. 0
radeonfb (0000:00:07.0): cannot map FB
radeonfb: probe of 0000:00:07.0 failed with error -5
This is the PCI initialization :
PCI: Probing PCI hardware
pci 0000:00:00.0: unknown header type 7f, ignoring device
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.0: PME# disabled
pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.1: PME# disabled
pci 0000:00:08.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.2: PME# disabled
PCI: PHB (bus 0) bridge rsrc 0: 0000000000011000-0000000000020fff [0x100],
parent c0439ce0 (PCI IO)
PCI BUS: 0xc063e044:0xc0439ce0, 0xc063e060:0xc0439cc4
PCI: PHB (bus 0) bridge rsrc 1: 0000000080000000-00000000bfffffff [0x200],
parent c0439cc4 (PCI mem)
PCI: PHB (bus 0) bridge rsrc 0: 00000000d8080000-00000000d808ffff [0x100],
parent c0439ce0 (PCI IO)
PCI: PHB (bus 0) bridge rsrc 1: 0000000060000000-000000007fffffff [0x200],
parent c0439cc4 (PCI mem)
PCI: Allocating 0000:00:07.0: Resource 0: 0000000080000000..0000000087ffffff
[21208]
PCI: Allocating 0000:00:07.0: Resource 1: 00000000d8011000..00000000d80110ff
[20101]
PCI: Cannot allocate resource region 1 of device 0000:00:07.0, will remap
PCI: Allocating 0000:00:07.0: Resource 2: 0000000088000000..000000008800ffff
[20200]
PCI: Allocating 0000:00:07.1: Resource 0: 0000000090000000..0000000097ffffff
[21208]
PCI: Allocating 0000:00:07.1: Resource 1: 0000000098000000..000000009800ffff
[20200]
PCI: Allocating 0000:00:08.0: Resource 0: 0000000098010000..0000000098010fff
[20200]
PCI: Allocating 0000:00:08.1: Resource 0: 0000000098011000..0000000098011fff
[20200]
PCI: Allocating 0000:00:08.2: Resource 0: 0000000098012000..00000000980120ff
[20200]
PCI: Allocating 0000:00:09.0: Resource 0: 00000000d8011100..00000000d8011107
[20101]
PCI: Cannot allocate resource region 0 of device 0000:00:09.0, will remap
PCI: Allocating 0000:00:09.0: Resource 1: 00000000d8011108..00000000d801110b
[20101]
PCI: Cannot allocate resource region 1 of device 0000:00:09.0, will remap
PCI: Allocating 0000:00:09.0: Resource 2: 00000000d8011110..00000000d8011117
[20101]
PCI: Cannot allocate resource region 2 of device 0000:00:09.0, will remap
PCI: Allocating 0000:00:09.0: Resource 3: 00000000d8011118..00000000d801111b
[20101]
PCI: Cannot allocate resource region 3 of device 0000:00:09.0, will remap
PCI: Allocating 0000:00:09.0: Resource 4: 00000000d8011120..00000000d801112f
[20101]
PCI: Cannot allocate resource region 4 of device 0000:00:09.0, will remap
PCI: Allocating 0000:00:09.0: Resource 5: 0000000098012400..00000000980127ff
[20200]
PCI: Allocating 0000:00:0a.0: Resource 0: 000000009c000000..000000009fffffff
[20200]
PCI: Assigning unassigned resouces...
bus: 00 index 0 io port: [11000, 20fff]
bus: 00 index 1 mmio: [80000000, bfffffff]
bus: 00 index 0 io port: [d8080000, d808ffff]
bus: 00 index 1 mmio: [60000000, 7fffffff]
At chipset's MV6450 init, I haven't found any errors. Otherwise an PCI SATA
controller and an 3Com network card running very well. I have no more ideas,
where can be the possible problem. Do you have any suggestions?
Best regards
Eduard Fuchs
More information about the Linuxppc-dev
mailing list