C67x00 reset problems
A. Nolson
alohanono at gmail.com
Thu Mar 12 00:40:50 EST 2009
I have upgraded to the latest John Linn's stable PPC kernel (2.6.25rc9)
and I have applied the patch v11(latest) from Peter Korsgaard for the
c67x00. I get the same problem with that, plus an added "feature" of my
Xilinx Temac driver not working anymore :/
loaded at: 00400000
0056B19C
board data at: 00569120
0056919C
relocated to: 00404064
004040E0
zimage at: 00404E50
00568B99
avail ram: 0056C000
04000000
Linux/PPC load: console=ttyUL0,57600 root=/dev/xsa2 rw
init=/sbin/init
Uncompressing
Linux...done.
Now booting the
kernel
[ 0.000000] Linux version 2.6.25-rc9-dirty (xxx at xxx) (gcc versio
n 4.2.2) #3 PREEMPT Wed Mar 11 14:04:07 CET
2009
[ 0.000000] Xilinx Generic PowerPC board support package (Xilinx
ML403) (Virt
ex-4
FX)
[ 0.000000] Zone PFN
ranges:
[ 0.000000] DMA 0 ->
16384
[ 0.000000] Normal 16384 ->
16384
[ 0.000000] HighMem 16384 ->
16384
[ 0.000000] Movable zone start PFN for each
node
[ 0.000000] early_node_map[1] active PFN
ranges
[ 0.000000] 0: 0 ->
16384
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pag
es:
16256
[ 0.000000] Kernel command line: console=ttyUL0,57600 root=/dev/xsa2
rw init=
/sbin/init
[ 0.000000] Xilinx INTC #0 at 0x41200000 mapped to
0xFDFFF000
[ 0.000000] PID hash table entries: 256 (order: 8, 1024
bytes)
[ 0.000164] Console: colour dummy device
80x25
[ 0.000578] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.001311] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.013500] Memory: 61580k available (2392k kernel code, 796k data,
116k init
, 0k
highmem)
[ 0.013765] SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, N
odes=1
[ 0.035217] Mount-cache hash table entries:
512
[ 0.040125] net_namespace: 152
bytes
[ 0.042375] NET: Registered protocol family
16
[ 0.045220] Registering device
uartlite:0
[ 0.045919] Registering device
xsysace:0
[ 0.046686] Registering device
xilinx_temac:0
[ 0.047481] Registering device
xilinx_gpio_iic:0
[ 0.048251] Registering device
xilinx_gpio_iic:1
[ 0.048960] Registering device
c67x00:0
[ 0.049773] Registering device
xilinx_spi:0
[ 0.073716] usbcore: registered new interface driver
usbfs
[ 0.074525] usbcore: registered new interface driver
hub
[ 0.075645] usbcore: registered new device driver
usb
[ 0.090615] NET: Registered protocol family
2
[ 0.100483] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.102400] TCP established hash table entries: 2048 (order: 2, 16384
bytes)
[ 0.102680] TCP bind hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.102837] TCP: Hash tables configured (established 2048 bind
2048)
[ 0.102866] TCP reno
registered
[ 0.162283] Installing knfsd (copyright (C) 1996
okir at monad.swb.de).
[ 0.165259] io scheduler noop
registered
[ 0.165302] io scheduler anticipatory
registered
[ 0.165328] io scheduler deadline
registered
[ 0.165676] io scheduler cfq registered
(default)
[ 0.764717] Generic RTC Driver
v1.07
[ 0.765484] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing
disabled
[ 0.773231] uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 5) is a
uartlite
[ 0.773293] console [ttyUL0]
enabled
[ 1.281526] brd: module
loaded
[ 1.292177] loop: module
loaded
[ 1.297447] xsysace xsa: Xilinx SystemACE revision
1.0.12
[ 1.307231] xsysace xsa: capacity: 4001760
sectors
[ 1.316387] xsa: xsa1 xsa2
xsa3
[ 1.326864] Xilinx SystemACE device driver,
major=254
[ 1.335692] nbd: registered device at major
43
[ 1.359637] XTemac: using sgDMA
mode.
[ 1.364027] XTemac: using TxDRE
mode
[ 1.371101] XTemac: using RxDRE
mode
[ 1.378028] XTemac: buffer descriptor size: 32768
(0x8000)
[ 1.390044] XTemac: (buffer_descriptor_init) phy: 0x3d30000, virt:
0xff100000
, size:
0x8000
[ 1.411208] eth%d: XTemac: PHY detected at address
0.
[ 1.418020] 00: 1140 7949 0141 0cc2 01e1 0000 0004
2001
[ 1.429021] 08: 0000 0300 0000 0000 0000 0000 0000
3000
[ 1.439344] 10: 0078 8100 0000 0000 0c60 0000 0000
0000
[ 1.450021] 18: 4100 0000 000a 848f 0000 0000 0000
0000
[ 1.460429] eth0: Dropping NETIF_F_SG since no checksum
feature.
[ 1.475459] eth0: Xilinx TEMAC #0 at 0x81200000 mapped to 0xC5020000,
irq=2
[ 1.486078] eth0: XTemac id 1.0f, block id 5, type
8
[ 1.498804] xilinx_spi xilinx_spi.0: at 0x40618000 mapped to
0xC5004000, irq=
4
[ 6.515214] ------------[ cut here
]------------
[ 6.516000] Badness at
drivers/usb/c67x00/c67x00-ll-hpi.c:241
[ 6.516000] NIP: c01aa530 LR: c01aa524 CTR:
c0018a14
[ 6.516000] REGS: c3c1bd70 TRAP: 0700 Not tainted
(2.6.25-rc9-dirty)
[ 6.516000] MSR: 00029030 <EE,ME,IR,DR> CR: 24000082 XER:
2000005d
[ 6.516000] TASK = c3c18000[1] 'swapper' THREAD:
c3c1a000
[ 6.516000] GPR00: 00000001 c3c1be20 c3c18000 00000000 c02d7518
c0314730 8453
2ba7
00000001
[ 6.516000] GPR08: 00000000 00000000 c3d15e04 c3c1a000 24000082
ffffffff c029
2be0
c0292bf0
[ 6.516000] GPR16: c0292c14 c0292c1c c0292c2c c0292c58 c0292c6c
00000000 ffff
ffff
ffffffff
[ 6.516000] GPR24: c0310000 c0292bd8 c02d8a88 00000000 c3d15de8
00000000 c3d1
5de0
c02d8a6c
[ 6.516000] NIP [c01aa530]
c67x00_ll_reset+0x48/0x88
[ 6.516000] LR [c01aa524]
c67x00_ll_reset+0x3c/0x88
[ 6.516000] Call
Trace:
[ 6.516000] [c3c1be20] [c01aa524] c67x00_ll_reset+0x3c/0x88
(unreliable)
[ 6.516000] [c3c1be40] [c02505a4]
c67x00_drv_probe+0x16c/0x2e0
[ 6.516000] [c3c1be70] [c0180e4c]
platform_drv_probe+0x20/0x30
[ 6.516000] [c3c1be80] [c017ee44]
driver_probe_device+0xec/0x194
[ 6.516000] [c3c1bea0] [c017f09c]
__driver_attach+0x88/0xf4
[ 6.516000] [c3c1bec0] [c017df94]
bus_for_each_dev+0x58/0x98
[ 6.516000] [c3c1bef0] [c017ec40]
driver_attach+0x24/0x34
[ 6.516000] [c3c1bf00] [c017e9b8]
bus_add_driver+0xb4/0x218
[ 6.516000] [c3c1bf20] [c017f400]
driver_register+0x78/0x10c
[ 6.516000] [c3c1bf40] [c01811c8]
platform_driver_register+0x9c/0xac
[ 6.516000] [c3c1bf50] [c030641c]
c67x00_init+0x18/0x28
[ 6.516000] [c3c1bf60] [c02f4204]
kernel_init+0x100/0x298
[ 6.516000] [c3c1bff0] [c0004918]
kernel_thread+0x44/0x60
[ 6.516000] Instruction
dump:
[ 6.516000] 90010024 480a89e5 38800000 7fa3eb78 6084fa50 4bffefbd
387d0020 38
801388
[ 6.516000] 480a7fd1 707dffff 7c000026 54001ffe <0f000000> 3c00ffff
7fbd00d0
60000005
[ 6.860078] c67x00 c67x00.0: Device reset
failed
[ 6.866113] c67x00: probe of c67x00.0 failed with error
65531
[ 6.879751] usbcore: registered new interface driver
libusual
[ 6.890566] usbcore: registered new interface driver
cypress_cy7c63
[ 6.903058] i8042.c: No controller
found.
[ 6.912220] mice: PS/2 mouse device common for all
mice
[ 6.923303] i2c /dev entries
driver
[ 6.930558] i2c-parport-light: adapter type
unspecified
[ 6.941806] xilinx_gpio_iic.0 #0 at 0x400C0000 mapped to
0xC5040000
[ 6.953631] xilinx_gpio_iic.1 #1 at 0x400A0000 mapped to
0xC5060000
[ 7.041126] usbcore: registered new interface driver
usbhid
[ 7.049104] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core
driver
[ 7.065981] TCP cubic
registered
[ 7.070135] NET: Registered protocol family
1
[ 7.078177] NET: Registered protocol family
17
[ 7.090737] RPC: Registered udp transport
module.
[ 7.097122] RPC: Registered tcp transport
module.
[ 7.123804] kjournald starting. Commit interval 5
seconds
[ 7.132117] EXT3-fs warning: maximal mount count reached, running
e2fsck is r
ecommended
[ 7.150770] EXT3 FS on xsa2, internal
journal
[ 7.156016] EXT3-fs: recovery
complete.
[ 7.164048] EXT3-fs: mounted filesystem with ordered data
mode.
[ 7.176115] VFS: Mounted root (ext3
filesystem).
[ 7.185289] Freeing unused kernel memory: 116k
init
Grant Likely wrote:
> Unfortunately, the 2.6.24-rc3 stuff in my git tree is really old.
> I've been getting all of my recent work into mainline. The CF driver
> is in much better shape there. The c67x00 driver is merged into
> mainline, but I haven't tested it at all in the last year so I don't
> know how well it will work.
>
> Cheers,
> g.
>
> On Tue, Mar 10, 2009 at 5:17 PM, A. Nolson <alohanono at gmail.com> wrote:
>
>> Hi,
>>
>> I am using 2.6.24-rc3 ( secretlabs git) in an ML403 where I want to
>> use the USB c67x00 based host with Peter Kosgaard driver. I am using it
>> together with the sysace device for CF access ( in the ML403 those two
>> share lines, but I managed to insert some logic to multiplex both
>> devices). I have been able to use the c67300 without OS, but when I try
>> to boot the kernel I am getting driver reset problems (the whole log is
>> at the end)
>>
>> [ 6.882540] c67x00 c67x00.0: Device reset
>> failed
>> [ 6.889278] c67x00: probe of c67x00.0 failed with error 65531
>>
>> And of course the device cannot get probed. I think this has happened to
>> other people before but I can't find the solution in the archive. My
>> virtex_devices.c initialization looks like this:
>>
>> #define XPAR_C67x00_USB(num) { \
>> .name = "c67x00", \
>> .id = num, \
>> .num_resources = 2, \
>> .resource = (struct resource[]) { \
>> { \
>> .start = XPAR_C67X00_USB_PRH##num##_BASEADDR, \
>> .end = XPAR_C67X00_USB_PRH##num##_BASEADDR + 0xf, \
>> .flags = IORESOURCE_MEM, \
>> }, \
>> { \
>> .start = XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR, \
>> .end = XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR, \
>> .flags = IORESOURCE_IRQ, \
>> }, \
>> }, \
>> .dev.platform_data = &(struct c67x00_platform_data) { \
>> .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_PERIPHERAL_A, \
>> .hpi_regstep = 0x02, /* A0 not connected on 16bit bus */ \
>> }, \
>> }
>>
>> /* Cypress USB C67x00 instances */
>> #if defined(XPAR_C67X00_USB_PRH0_BASEADDR)
>> XPAR_C67x00_USB(0),
>> #endif
>>
>>
>> and my xparameters_ml403.h like this:
>>
>> /* Definitions for peripheral C67X00_USB */
>> #define XPAR_C67X00_USB_PRH0_BASEADDR 0xA5000000
>> #define XPAR_C67X00_USB_PRH0_HIGHADDR 0xA500FFFF
>> #define XPAR_C67X00_USB_PRH1_BASEADDR 0xA5010000
>> #define XPAR_C67X00_USB_PRH1_HIGHADDR 0xA501FFFF
>> #define XPAR_C67X00_USB_PRH2_BASEADDR 0xA5020000
>> #define XPAR_C67X00_USB_PRH2_HIGHADDR 0xA502FFFF
>> #define XPAR_C67X00_USB_PRH3_BASEADDR 0xA5030000
>> #define XPAR_C67X00_USB_PRH3_HIGHADDR 0xA503FFFF
>>
>> #define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 0
>> #define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000001
>>
>> I don't know what could be wrong here. Any clues?
>>
>> /Albert
>>
>>
>>
>> loaded at: 00400000
>> 0056419C
>> board data at: 00562120
>> 0056219C
>> relocated to: 0040406C
>> 004040E8
>> zimage at: 00404E58
>> 00561F12
>> avail ram: 00565000
>> 04000000
>>
>>
>> Linux/PPC load: console=ttyUL0,57600 root=/dev/xsa2 rw
>> init=/sbin/init
>> Uncompressing
>> Linux...done.
>> Now booting the
>> kernel
>> [ 0.000000] Linux version 2.6.24-rc3-dirty (xxx at xxx) (gcc vers
>> n 4.2.2) #77 PREEMPT Mon Mar 9 18:31:59 CET
>> 2009
>> [ 0.000000] Xilinx ML403 Reference System (Virtex-4
>> FX)
>> [ 0.000000] Zone PFN
>> ranges:
>> [ 0.000000] DMA 0 ->
>> 16384
>> [ 0.000000] Normal 16384 ->
>> 16384
>> [ 0.000000] HighMem 16384 ->
>> 16384
>> [ 0.000000] Movable zone start PFN for each
>> node
>> [ 0.000000] early_node_map[1] active PFN
>> ranges
>> [ 0.000000] 0: 0 ->
>> 16384
>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>> Total p
>> es:
>> 16256
>> [ 0.000000] Kernel command line: console=ttyUL0,57600 root=/dev/xsa2
>> rw ini
>> /sbin/init
>>
>> [ 0.000000] Xilinx INTC #0 at 0x41200000 mapped to
>> 0xFDFFF000
>> [ 0.000000] PID hash table entries: 256 (order: 8, 1024
>> bytes)
>> [ 0.000160] Console: colour dummy device
>> 80x25
>> [ 0.000569] Dentry cache hash table entries: 8192 (order: 3, 32768
>> bytes)
>> [ 0.001326] Inode-cache hash table entries: 4096 (order: 2, 16384
>> bytes)
>> [ 0.013549] Memory: 61628k available (2352k kernel code, 796k data,
>> 112k in
>> , 0k
>> highmem)
>> [ 0.013800] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4,
>> CPUs=1,
>> odes=1
>>
>> [ 0.035282] Mount-cache hash table entries:
>> 512
>> [ 0.039567] net_namespace: 64
>> bytes
>> [ 0.044545] NET: Registered protocol family
>> 16
>> [ 0.051781] Registering
>> spi1_board_info
>> [ 0.074960] usbcore: registered new interface driver
>> usbfs
>> [ 0.075863] usbcore: registered new interface driver
>> hub
>> [ 0.076911] usbcore: registered new device driver
>> usb
>> [ 0.090812] NET: Registered protocol family
>> 2
>> [ 0.100648] IP route cache hash table entries: 1024 (order: 0, 4096
>> bytes)
>> [ 0.103337] TCP established hash table entries: 2048 (order: 2, 16384
>> bytes
>> [ 0.103614] TCP bind hash table entries: 2048 (order: 1, 8192
>> bytes)
>> [ 0.103770] TCP: Hash tables configured (established 2048 bind
>> 2048)
>> [ 0.103798] TCP reno
>> registered
>> [ 0.107443] sysctl table check failed: /kernel/l2cr .1.31 Missing
>> strategy
>> [ 0.107511] Call
>> Trace:
>> [ 0.107530] [c3c11de0] [c0008338] show_stack+0x50/0x188
>> (unreliable)
>> [ 0.107606] [c3c11e30] [c003cf88]
>> set_fail+0x50/0x68
>> [ 0.107675] [c3c11e50] [c003d5f8]
>> sysctl_check_table+0x658/0x6ac
>> [ 0.107730] [c3c11ec0] [c003d60c]
>> sysctl_check_table+0x66c/0x6ac
>> [ 0.107785] [c3c11f30] [c002907c]
>> register_sysctl_table+0x64/0xe0
>> [ 0.107851] [c3c11f50] [c02ee750]
>> register_ppc_htab_sysctl+0x18/0x2c
>> [ 0.107919] [c3c11f60] [c02e8230]
>> kernel_init+0x10c/0x2a4
>> [ 0.107962] [c3c11ff0] [c0004c38]
>> kernel_thread+0x44/0x60
>> [ 0.165612] Installing knfsd (copyright (C) 1996
>> okir at monad.swb.de).
>> [ 0.168476] io scheduler noop
>> registered
>> [ 0.168515] io scheduler anticipatory
>> registered
>> [ 0.168538] io scheduler deadline
>> registered
>> [ 0.168885] io scheduler cfq registered
>> (default)
>> [ 0.763801] Generic RTC Driver
>> v1.07
>> [ 0.764606] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
>> sharin
>> disabled
>>
>> [ 0.773092] uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 5) is a
>> uartlite
>> [ 0.773152] console [ttyUL0]
>> enabled
>> [ 1.334309] RAMDISK driver initialized: 16 RAM disks of 4096K size
>> 1024 blo
>> size
>>
>> [ 1.353807] loop: module
>> loaded
>> [ 1.358480] xsysace xsysace.0: Xilinx SystemACE revision
>> 1.0.12
>> [ 1.370084] xsysace xsysace.0: capacity: 7831152
>> sectors
>> [ 1.380238] xsa: xsa1 xsa2
>> xsa3
>> [ 1.389686] Xilinx SystemACE device driver,
>> major=254
>> [ 1.398224] nbd: registered device at major
>> 43
>> [ 1.424199] XTemac: using sgDMA
>> mode.
>> [ 1.429022] XTemac: using TxDRE
>> mode
>> [ 1.436090] XTemac: using RxDRE
>> mode
>> [ 1.443173] XTemac: buffer descriptor size: 32768
>> (0x8000)
>> [ 1.454594] XTemac: (buffer_descriptor_init) phy: 0x3d20000, virt:
>> 0xff1000
>> , size:
>> 0x8000
>> [ 1.475707] eth%d: XTemac: PHY detected at address
>> 0.
>> [ 1.483329] eth0: Dropping NETIF_F_SG since no checksum
>> feature.
>> [ 1.498175] eth0: Xilinx TEMAC #0 at 0x81200000 mapped to 0xC5020000,
>> irq=2
>> [ 1.509565] eth0: XTemac id 1.0f, block id 5, type
>> 8
>> [ 1.522258] xilinx_spi xilinx_spi.0: at 0x40618000 mapped to
>> 0xC5004000, ir
>> 4
>>
>> [ 6.538578] ------------[ cut here
>> ]------------
>> [ 6.545188] Badness at
>> drivers/usb/c67x00/c67x00-ll-hpi.c:241
>> [ 6.556588] NIP: c01a4ec0 LR: c01a4eb4 CTR:
>> c00186a4
>> [ 6.566441] REGS: c3c11d80 TRAP: 0700 Not tainted
>> (2.6.24-rc3-dirty)
>>
>> [ 6.580945] MSR: 00029030 <EE,ME,IR,DR> CR: 35000093 XER:
>> e0000065
>> [ 6.593565] TASK = c3c0d000[1] 'swapper' THREAD:
>> c3c10000
>> [ 6.603925] GPR00: 00000001 c3c11e30 c3c0d000 00000000 c02c8528
>> 00000001 85
>> 5751
>> 00000000
>> [ 6.620512] GPR08: 00000000 00000000 c3d12384 c3c10000 35000093
>> ffffffff c0
>> 4040
>> c0284050
>> [ 6.637100] GPR16: c0284074 c028407c c028408c c02840b8 c02840cc
>> 00000000 ff
>> ffff
>> ffffffff
>> [ 6.653687] GPR24: c0300000 c0284038 c02c9a20 00000000 c3d12368
>> 00000000 c3
>> 2360
>> c02c9a04
>> [ 6.670620] NIP [c01a4ec0]
>> c67x00_ll_reset+0x48/0x88
>> [ 6.680468] LR [c01a4eb4]
>> c67x00_ll_reset+0x3c/0x88
>> [ 6.690143] Call
>> Trace:
>> [ 6.694986] [c3c11e30] [c01a4eb4] c67x00_ll_reset+0x3c/0x88
>> (unreliable)
>> [ 6.708290] [c3c11e50] [c01a3b0c]
>> c67x00_drv_probe+0x16c/0x2e0
>> [ 6.719866] [c3c11e80] [c017af4c]
>> platform_drv_probe+0x20/0x30
>> [ 6.731442] [c3c11e90] [c0179328]
>> driver_probe_device+0xec/0x194
>> [ 6.743364] [c3c11eb0] [c0179580]
>> __driver_attach+0x88/0xf4
>> [ 6.754422] [c3c11ed0] [c017855c]
>> bus_for_each_dev+0x54/0x94
>> [ 6.765654] [c3c11f00] [c017912c]
>> driver_attach+0x24/0x34
>> [ 6.776366] [c3c11f10] [c0178998]
>> bus_add_driver+0x78/0x1d4
>> [ 6.787424] [c3c11f30] [c01798b4]
>> driver_register+0x88/0x9c
>> [ 6.798482] [c3c11f40] [c017b2c8]
>> platform_driver_register+0x9c/0xac
>> [ 6.811095] [c3c11f50] [c02fae74]
>> c67x00_init+0x18/0x28
>> [ 6.821462] [c3c11f60] [c02e8230]
>> kernel_init+0x10c/0x2a4
>> [ 6.832175] [c3c11ff0] [c0004c38]
>> kernel_thread+0x44/0x60
>> [ 6.842886] Instruction
>> dump:
>> [ 6.848760] 90010024 480a4969 38800000 7fa3eb78 6084fa50 4bffefbd
>> 387d0020
>> 801388
>>
>> [ 6.864136] 480a3edd 707dffff 7c000026 54001ffe <0f000000> 3c00ffff
>> 7fbd00d
>> 60000005
>>
>> [ 6.882540] c67x00 c67x00.0: Device reset
>> failed
>> [ 6.889278] c67x00: probe of c67x00.0 failed with error
>> 65531
>> [ 6.901621] usbcore: registered new interface driver
>> libusual
>> [ 6.912837] usbcore: registered new interface driver
>> cypress_cy7c63
>> [ 6.925443] i8042.c: No controller
>> found.
>> [ 6.934533] mice: PS/2 mouse device common for all
>> mice
>> [ 6.945746] i2c /dev entries
>> driver
>> [ 6.953016] i2c-parport-light: adapter type
>> unspecified
>> [ 6.964041] usbcore: registered new interface driver
>> usbhid
>> [ 6.972725] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core
>> driver
>> [ 6.985267] TCP cubic
>> registered
>> [ 6.991691] NET: Registered protocol family
>> 1
>> [ 7.000260] NET: Registered protocol family
>> 17
>> [ 7.011149] RPC: Registered udp transport
>> module.
>> [ 7.018303] RPC: Registered tcp transport
>> module.
>> [ 20.920617] kjournald starting. Commit interval 5
>> seconds
>> [ 20.975785] EXT3 FS on xsa2, internal
>> journal
>> [ 20.981905] EXT3-fs: recovery
>> complete.
>> [ 21.287791] EXT3-fs: mounted filesystem with ordered data
>> mode.
>> [ 21.297194] VFS: Mounted root (ext3
>> filesystem).
>>
>>
>>
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev at ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>>
>>
>
>
>
>
More information about the Linuxppc-dev
mailing list