[PATCH, RFC]
Eddie Dawydiuk
eddie at embeddedarm.com
Sat Mar 7 08:51:28 EST 2009
Hello,
> Your patch is word-wrapped. It also lacks the Signed-off-by tag, which
> is required.
I apologize please see an updated patch below.
> The changelog sounds as if there are bugs being fixed here, but really
> you're adding support for something entirely new. The yosemite board
> comes with U-Boot, which uses uImages. You seem to be adding support
> for using simpleboot on the Yosemite board. Is that correct?
Yes, the patch ensures the simpleboot image works on the Yosemite board. I was
under the impression the code was broken as one can build a simpleImage for the
Yosemite board as described in Documentation/powerpc/bootwrapper.txt without any
modification on a vanilla kernel, although the resulting image does not work
without the following patches.
> You can't do this. If you hard code the MAC address of whatever board
> you are using in the kernel, everyone will have to edit it. You need
> to specify this in your board DTS file or via some other configurable
> mechansim.
Oops, sorry I forgot to pull out the debug code...
Signed-off-by: Eddie Dawydiuk <eddie at embeddedarm.com>
diff -urN linux-2.6.28.orig/arch/powerpc/boot/Makefile
linux-2.6.28/arch/powerpc/boot/Makefile
--- linux-2.6.28.orig/arch/powerpc/boot/Makefile 2008-12-24
16:26:37.000000000 -0700
+++ linux-2.6.28/arch/powerpc/boot/Makefile 2009-03-05 17:35:53.000000000 -0700
@@ -70,7 +70,7 @@
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
- cuboot-acadia.c
+ cuboot-acadia.c simpleboot-yosemite.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -224,7 +224,7 @@
image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
-image-$(CONFIG_YOSEMITE) += cuImage.yosemite
+image-$(CONFIG_YOSEMITE) += cuImage.yosemite simpleImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS)
diff -urN linux-2.6.28.orig/arch/powerpc/boot/wrapper
linux-2.6.28/arch/powerpc/boot/wrapper
--- linux-2.6.28.orig/arch/powerpc/boot/wrapper 2008-12-24 16:26:37.000000000 -0700
+++ linux-2.6.28/arch/powerpc/boot/wrapper 2009-03-05 17:36:10.000000000 -0700
@@ -214,8 +214,12 @@
platformo="$object/simpleboot.o $object/virtex.o"
binary=y
;;
+simpleboot-yosemite)
+ platformo="$object/fixed-head.o $object/simpleboot.o
$object/simpleboot-yosemite.o"
+ binary=y
+ ;;
simpleboot-*)
- platformo="$object/simpleboot.o"
+ platformo="$object/fixed-head.o $object/simpleboot.o"
binary=y
;;
asp834x-redboot)
diff -urN linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c
linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c
--- linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c 1969-12-31
17:00:00.000000000 -0700
+++ linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c 2009-03-06
14:55:46.000000000 -0700
@@ -0,0 +1,24 @@
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static void yosemite_fixups(void)
+{
+ unsigned long sysclk = 50000000;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200, 400000000);
+ ibm4xx_sdram_fixup_memsize();
+ dt_fixup_mac_address_by_alias("ethernet0", eth0adr);
+ dt_fixup_mac_address_by_alias("ethernet1", eth1adr);
+}
+
+void platform_specific_init(void)
+{
+ platform_ops.fixups = yosemite_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+}
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16525 East Laser Drive | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
More information about the Linuxppc-dev
mailing list