[PATCH 06/11] sdhci: Add get_{max,timeout}_clock callbacks

Anton Vorontsov avorontsov at ru.mvista.com
Fri Mar 6 07:28:40 EST 2009


From: Ben Dooks <ben-linux at fluff.org>

Some controllers do not provide clock information in their capabilities
(in the Samsung case, it is because there are multiple clock sources
available to the controller). Add hooks to allow the system to supply
clock information.

p.s.
In the original Ben's patch there was a bug that makes sdhci_add_host()
return -ENODEV even if callbacks were specified. This is fixed now.

Signed-off-by: Ben Dooks <ben-linux at fluff.org>
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 drivers/mmc/host/sdhci.c |   22 +++++++++++++++-------
 drivers/mmc/host/sdhci.h |    2 ++
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8aaf3a5..cca80d3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1729,19 +1729,27 @@ int sdhci_add_host(struct sdhci_host *host)
 
 	host->max_clk =
 		(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+	host->max_clk *= 1000000;
 	if (host->max_clk == 0) {
-		printk(KERN_ERR "%s: Hardware doesn't specify base clock "
-			"frequency.\n", mmc_hostname(mmc));
-		return -ENODEV;
+		if (!host->ops->get_max_clock) {
+			printk(KERN_ERR
+			       "%s: Hardware doesn't specify base clock "
+			       "frequency.\n", mmc_hostname(mmc));
+			return -ENODEV;
+		}
+		host->max_clk = host->ops->get_max_clock(host);
 	}
-	host->max_clk *= 1000000;
 
 	host->timeout_clk =
 		(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
 	if (host->timeout_clk == 0) {
-		printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
-			"frequency.\n", mmc_hostname(mmc));
-		return -ENODEV;
+		if (!host->ops->get_timeout_clock) {
+			printk(KERN_ERR
+			       "%s: Hardware doesn't specify timeout clock "
+			       "frequency.\n", mmc_hostname(mmc));
+			return -ENODEV;
+		}
+		host->timeout_clk = host->ops->get_timeout_clock(host);
 	}
 	if (caps & SDHCI_TIMEOUT_CLK_UNIT)
 		host->timeout_clk *= 1000;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index d0d812e..34f1849 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -281,6 +281,8 @@ struct sdhci_ops {
 	void		(*writeb)(struct sdhci_host *host, u8 val, int reg);
 
 	int		(*enable_dma)(struct sdhci_host *host);
+	unsigned int	(*get_max_clock)(struct sdhci_host *host);
+	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
 };
 
 extern void sdhci_writel(struct sdhci_host *host, u32 val, int reg);
-- 
1.5.6.5




More information about the Linuxppc-dev mailing list