[PATCH] powerpc: Have Warp take advantage of GPIO LEDs default-state = keep

[Sean MacLennan]

Yes, it's me again. The GPIO LEDs default-state = keep patch was
accepted into the kernel. This patch takes advantage of that patch. 

It would be nice if the patch made it into 2.6.31 since this was my last
outstanding patch. I really didn't think the "keep" patch would be
accepted in this release.

But at minimum, it would be nice if the DTS change went in. I actually
held back on a change to warp.c that made the LEDS work correctly if
AD7414 was not configured. The "keep" makes that change unnecessary...
but you need the dts fix.

The DTS fix is just two lines and is fully backwards compatible. The
warp.c patch just removes the hardcoding of the two LEDs.

Now I have to get used to the LED not glitching on startup ;)

Cheers,
   Sean

The GPIO LEDS driver now has a default-state of keep. Since u-boot sets the initial
LED state on the Warp, take advantage of this new state.

Signed-off-by: Sean MacLennan <smaclennan at pikatech.com>
---
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56..31605ee 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
 				compatible = "gpio-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "on";
+					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
 				};
 			};
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 0362c88..9916b39 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -64,8 +64,6 @@ define_machine(warp) {
 };
 
 
-static u32 post_info;
-
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -87,10 +85,9 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2) {
+	if (post1 || post2)
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-		post_info = 1;
-	} else
+	else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
@@ -179,15 +176,10 @@ static int pika_setup_leds(void)
 	}
 
 	for_each_child_of_node(np, child)
-		if (strcmp(child->name, "green") == 0) {
+		if (strcmp(child->name, "green") == 0)
 			green_led = of_get_gpio(child, 0);
-			/* Turn back on the green LED */
-			gpio_set_value(green_led, 1);
-		} else if (strcmp(child->name, "red") == 0) {
+		else if (strcmp(child->name, "red") == 0)
 			red_led = of_get_gpio(child, 0);
-			/* Set based on post */
-			gpio_set_value(red_led, post_info);
-		}
 
 	of_node_put(np);